Research products

LINE (A)

  • Borazjani S., Belingardi G. – “Lightweight design: detailed comparison of roof panel solutions at crash and stiffness analyses”, Int. J. of Crashworthiness, 2017, vol. 22, pp. 49-62, doi: 10.1080/13588265.2016.1215589
  • Scattina A., Belingardi G. – “Numerical study of a hybrid wire-net bonnet for pedestrian safety”, Int. Journal of Crashworthiness, 2015, vol. 20, pp. 142-150, DOI: 10.1080/13588265.2014.984388
  • Obradovic J., Ertugus E., Belingardi G., Eckstein L. – “Improvement of lateral vehicle crashworthiness by introducing innovative structural solutions”, proc. of XXIII JUMV Int. Automotive Conference, Belgrade, Serbia, 19 – 21 April 2011
  • Peroni L., Avalle M., Belingardi G. – “Comparison of the energy absorption capability of crash boxes assembled by spot-weld and continuous joining techniques”, International Journal of Impact Engineering, 2009, vol. 36, pp. 498-511, ISSN 0734-743X
  • Belingardi G., Martella P., Peroni L. – “Analysis of the coach rollover scenario”, Vehicle System Dynamics, 2006, vol. 44 n. Supple, pp. 455-467, ISSN 0042-3114

LINE (B)

  • Anselma P.G., YiHuo, Roeleveld J., Emadi A., Belingardi G. – “Rapid optimal design of a multimodepower split hybrid electric vehicle transmission”, Proc. of IMechE Part D: J Automobile Engineering, 2018, DOI: 10.1177/0954407017750789
  • Belingardi G., Cuffaro V., Curà F. – “Multibody approach for the dynamic analysis of gears transmission for an electric vehicle”, Proc. of IMechE Part C, 2016, DOI: 10.1177/0954406216674981
  • Del Pozo De Dios E., Alba J., Avalle M., Cisneros O., Scattina A., Esnaola A. – “Optibody: A new structural design focused in safety”, SAE International, SAE Technical Papers, Volume 12, 2013, 8th SAE INDIA International Mobility Conference and Exposition and Commercial Vehicle Engineering Congress 2013, SIMCOMVEC 2013; Chennai, Tamil Nadu; India, ISSN: 0148-7191, DOI: 10.4271/2013-01-2760, 4-7 dicembre 2013
  • Del Pozo de Dios E., Dávila A., Alba J., Avalle M. – “Optibody Project: Optimizing Vehicle Structures for Electric Light Trucks and Vans”, in Proceedings of the FISITA 2012 World Automotive Congress, Springer Berlin Heidelberg (DEU), FISITA 2012 World Automotive Congress, Beijing 27-30 novembre 2012, pp. 8, 2012, Vol. 8, ISBN: 9783642338359, DOI: 10.1007/978-3-642-33835-9_58
  • Del Pozo de Dios E., Alba J., Cisneros O., Avalle M., Scattina A., Esnaola A., Pochettino G. – “Optimizing Vehicle Structure Architectures for Light Trucks”, 23rd Int. Technical Conf. on the Enhanced Safety of Vehicles (ESV), Seoul, Korea 27-30 maggio 2013, pp. 10, 2013

LINE (C)

  • Boria S., Scattina A., Belingardi G. – “Axial crushing of metal-composite hybrid tubes: experimental analysis”, Procedia Structural Integrity, 2018, vol.8, pp. 102-117, doi 10.1016/j.prostr.2017.12.012
  • Belingardi G., Jindong J. – “Crashworthiness evaluation of composite vehicle side door with an innovative design”, Int. J. Automotive Composites, 2016, Vol. 2, No. 1, pp. 75–93
  • Belingardi G., Scattina A. – “Experimental investigation on the bending behavior of hybrid and steel thin walled box beams - The role of adhesive joints”, Int. J. of Adhesion & Adhesives, 2013, vol. 40, pp. 31–37, DOI: 10.1016/j.ijadhadh.2012.08.002
  • Obradovic J., Boria S., Belingardi G. – “Lightweight design and crash analysis of composite frontal impact energy absorbing structures”, Composite Structures n. 94, 2012, pp. 423–430, doi:10.1016/j.compstruct.2011.08.005
  • Belingardi G., Chiandussi G., Gobetto E., Scattina A. – “Bonnet weight reduction and VRU protection: design proposals implementing non-conventional materials”, Int. J. of Automotive Technology, 2010, vol. 11 n. 6, pp. 831-842, ISSN 1229-9138
  • Avalle M., Peroni L., Peroni M., Scattina A. – “Bi-material joining for car body structures: experimental and numerical analysis”, Journal of Adhesion, 2010, vol. 86, pp. 539-560, ISSN 0021-8464

 LINE (D)

  • Boursier Niutta C., Wehrle E. J., Duddeck F.,  Belingardi G. - “Surrogate modeling in design optimization of structures with discontinuous responses”, Structural and Multidisciplinary Optimization, 2018, DOI: 10.1007/s00158-018-1958-7
  • Belingardi G., Beyene A.T., Koricho E.G. – “Geometrical optimization of bumper beam profile made of pultruded composite by numerical simulation”, Composite Structures, 2013, vol. 102, pp.  217–225, DOI:10.1016/ j.compstruct.2013.02.013
  • Chiandussi G., Codegone M., Ferrero S., Varesio F.E. – “Comparison of multi-objective optimization methodologies for engineering applications”, Computers & Mathematics with Applications, 2012, vol. 63, pp. 912-942, ISSN 0898-1221

LINE (E)

  • Scattina A., Mo F., Masson C., Avalle M., Arnoux P.J. – “Analysis of the influence of passenger vehicles front-end design on pedestrian lower extremity injuries by means of the LLMS model”, Traffic Injury Prevention, 2018, DOI: 10.1080/15389588.2018.1432858
  • Mo F., Arnoux P.J., Avalle M., Scattina A., Semino E., Masson C. – “Incidences of various passenger vehicle front-end designs on pedestrian lower limb injuries”, 2015, International Journal of Crashworthiness, Volume 20, Issue 4, pp. 337-347, ISSN: 1358-8265, DOI: 10.1080/13588265.2015.1012879
  • Avalle M., Belingardi G., Scattina A. – “Numerical and experimental investigation of a lightweight bonnet for pedestrian safety”, Int. J. of Crashworthiness,2013, vol. 18, pp. 29-29, DOI:10.1080/13588265.2012.730214

LINE (F)

  • Ciardiello R., Drzal L.T., Belingardi G. – ”Effects of carbon black and graphene nano-platelet fillers on the mechanical properties of syntactic foam.”- Composite Structures, 2017, vol. 178, pp. 9-19, doi: 10.1016/j.compstruct.2017.07.057
  • Tridello A., D’Andrea A., Paolino D.S., Belingardi G. – “A novel methodology for the assessment of the residual elastic properties in damaged composite components”, Composite Structures, 2017, Vol. 161, pp. 435-440, doi: 10.1016/j.compstruct.2016.11.028
  • Boria S., Scattina A., Belingardi G. – “Impact behavior of a fully thermoplastic composite”, Composite Structures, 2017, Volume 167, pp. 63-75, ISSN: 0263-8223, DOI: 10.1016/j.compstruct.2017.01.083
  • Koricho, E.G., Khomenko, A., Haq, M., Drzal, L.T., Belingardi, G., Martorana, B. – “Effect of Hybrid (Micro- and Nano-) Fillers on Impact Response of GFRP Composite”, Composite Structures, 2015, vol. 134, pp. 789–798, doi:10.1016/j.compstruct.2015.08.106
  • Boria S., Scattina A., Belingardi G. – “Axial energy absorption of CFRP truncated cones”, Composite Structures, 2015, Volume 130, pp. 18-28, ISSN: 0263-8223, DOI: 10.1016/j.compstruct.2015.04.026
  • Peroni L., Scapin M., Avalle M., Weise J., Lehmhus D. – “Dynamic mechanical behavior of syntactic iron foams with glass microspheres”, in: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012, ISSN 0921-5093
  • Scattina A., Peroni L., Peroni M., Avalle M. - “Numerical Analysis of Hybrid Joining in Car Body Applications”, Journal of Adhesion Science and Technology, 2011, vol. 25, pp. 2409-2433, ISSN 0169-4243
  • Avalle M., Lehmhus D., Peroni L., Pleteit H., Schmiechen P., Belingardi G., Busse M. – “AlSi7 metallic foams - aspects of material modelling for crash analysis”, Int. J. of Crashworthiness, 2009, vol. 14, pp. 269-285, ISSN 1358-8265