MUL2 (MULtilayered structures and MULtifield analyses)

MUL2 è il gruppo di ricerca guidato dal Professor Carrera nel Dipartimento di Ingegneria Meccanica e Aerospaziale del Politecnico di Torino. L’attività di ricerca di MUL2 si occupa dello sviluppo di modelli strutturali avanzati per l’analisi di strutture multistrato, con particolare attenzione per le analisi multicampo e le interazioni fluido-struttura. Durante l’ultimo decennio MUL2 ha sviluppato modelli avanzati trave, piastra e guscio sfruttando la Carrera Unified Formulation (CUF). Tali modelli vengono utilizzati per analisi statiche, dinamiche e aeroelastiche, buckling e failure di strutture aeronautiche e spaziali isotrope, composite, piezoelettriche ed FGM. La CUF permette infatti lo sviluppo di qualsiasi modello strutturale avanzato mediante la sua formulazione gerarchica. Nella CUF l’ordine di espansione, e quindi l’accuratezza, di un modello strutturale è uno degli input dell’analisi. Recentemente la CUF è stata inoltre utilizzata per lo sviluppo di modelli avanzati per la fluidodinamica.

Sito Web

Responsabile

CARRERA ERASMO

Personale

Assegnisti, borsisti, dottorandi, docenti esterni

AUGELLO RICCARDO

Pubblicazioni

Selezione di pubblicazioni recenti
In stampa
1. An Analysis of the Propagation of Surface Acoustic Waves in a Substrate Covered by a Metal T-plate with the Carrera Unified Formulation
  articolo
  
  Wu, Jinghui; Wang, Ji; Carrera, Erasmo; Augello, Riccardo
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  ISSN:1537-6532
2025
1. Component-Wise Modelling of Core and Skin in Sandwich Structures Using a Single Refined Beam Finite Element
  articolo
  
  ABU SALEM, Karim; Augello, Riccardo; Carrera, Erasmo
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.Article in Advance pp.14 (pp.1-14) ISSN:1537-6532 DOI:10.1080/15376494.2025.2458237
2. Metamodeling Approach for Wing Structural Sizing of Box-Wing Aircraft
  articolo
  
  Palaia, Giuseppe; ABU SALEM, Karim; Binante, Vincenzo; Carrera, Erasmo
  JOURNAL OF AIRCRAFT
  AIAA
  Vol.Article in Advance pp.10 (pp.1-10) ISSN:0021-8669 DOI:10.2514/1.C038131
3. Plate finite elements with arbitrary displacement fields along the thickness
  articolo
  
  Carrera, E.; Scano, D.; Zappino, E.
  FINITE ELEMENTS IN ANALYSIS AND DESIGN
  Elsevier
  Vol.244 pp.32 ISSN:0168-874X DOI:10.1016/j.finel.2024.104296
4. Dynamic analysis of complex rotating structures subjected to thermal loads through CUF-based high-fidelity finite beam elements
  proceeding
  
  Azzara, Rodolfo; Filippi, Matteo; Carrera, Erasmo
  In: Proceedings of the AIAA Scitech 2025 Forum
  AIAA
  AIAA Scitech 2025 Forum (Orlando, FL, USA) 6-10 January 2025
  pp.14
5. Deployment dynamics of a high strain deployable rolled-up composite SAR antenna
  articolo
  
  Tresoldi, Annalisa; Shore, Jason; Pagani, Alfonso; Aglietti, Guglielmo
  INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
  Elsevier
  Vol.310 pp.19 ISSN:0020-7683 DOI:10.1016/j.ijsolstr.2024.113208
6. Active aero-visco-elastic flutter control and layerwise modelling of supersonic smart sandwich panels with variable stiffness composites
  articolo
  
  Moreira, J. A.; Moleiro, F.; Araújo, A. L.; Pagani, A.
  AEROSPACE SCIENCE AND TECHNOLOGY
  Elsevier Masson
  Vol.157 pp.19 ISSN:1270-9638 DOI:10.1016/j.ast.2024.109847
7. Application of CUF for the Structural Optimization of Wings
  proceeding
  
  Cardone, D.; Cavallaro, R.; Cini, A.; Petrolo, M.; Zappino, E.
  In: AIAA Scitech 2025 Forum
  AIAA
  AIAA Scitech 2025 Forum (Orlando, FL, USA) 6-10 January 2025
  pp.19 (pp.1-19) ISBN:9781624107238 DOI:10.2514/6.2025-1745
8. A SQC proposal for monitoring the shipyard panel line
  capitolo
  
  Maisano, DOMENICO AUGUSTO FRANCESCO; Trombini, Mattia; Pagani, Alfonso
  SERIES ON ADVANCES IN MATHEMATICS FOR APPLIED SCIENCES
  Advanced Mathematical and Computational Tools in Metrology and Testing XIII
  World Scientific (SINGAPORE)
  Vol.94 pp.9 (pp.214-222) ISSN:1793-0901 ISBN:9789819800667 DOI:10.1142/9789819800674_0019
9. Scaling photogrammetry: A comparative evaluation and metrological assessment across small- and meso-scale domains
  articolo
  
  Trombini, Mattia; Maculotti, Giacomo; Maisano, Domenico Augusto; Pagani, Alfonso; Franceschini, Fiorenzo
  PRECISION ENGINEERING
  Elsevier
  Vol.92 pp.17 (pp.124-140) ISSN:0141-6359 DOI:10.1016/j.precisioneng.2024.12.002
10. Wave propagation in Prestressed Structures with Geometric Nonlinearities through Carrera Unified Formulation
  articolo
  
  Filippi, Matteo; Magliacano, Dario; Petrolo, Marco; Carrera, Erasmo
  AIAA JOURNAL
  American Institute of Aeronautics and Astronautics
  Vol.63 pp.17 (pp.292-308) ISSN:1533-385X DOI:10.2514/1.J064695
11. Fundamental frequency layer-wise optimization of tow-steered composites considering gaps and overlaps
  articolo
  
  Pagani, A.; Racionero Sanchez-Majano, A.; Zamani Roud Pushti, D.; Petrolo, M.; Carrera, E.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.104 pp.17 (pp.135-151) ISSN:2524-6968 DOI:10.1007/s42496-024-00212-w
2024
1. A PRELIMINARY METHODOLOGY TO ASSESS GUST SPECTRA VIA SATELLITE DATA
  proceeding
  
  Carrera, E.; Pagani, A.; Valente, M.; Palaia, G.
  In: 34th Congress of the International Council of the Aeronautical Sciences
  International Council of the Aeronautical Sciences
  34th Congress of the International Council of the Aeronautical Sciences (Florence (ITA)) 9-13 September 2024
2. Preliminary Performance Analysis of Medium-Range Liquid Hydrogen-Powered Box-Wing Aircraft
  articolo
  
  Palaia, G.; Abu Salem, K.; Carrera, E.
  AEROSPACE
  MDPI
  Vol.11 pp.29 ISSN:2226-4310 DOI:10.3390/aerospace11050379
3. Evaluation of the effects of different materials on the dynamic properties of thin-walled and sandwich metamaterial structures
  articolo
  
  Carrera, Erasmo; Augello, Riccardo; ABU SALEM, Karim
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.Article in Advance pp.16 (pp.1-16) ISSN:1537-6532 DOI:10.1080/15376494.2024.2434194
4. A discussion on benchmarking unconventional configurations with conventional aircraft: the box-wing study case
  articolo
  
  Abu Salem, K.; Palaia, G.; Carrera, E.
  CEAS AERONAUTICAL JOURNAL
  Springer
  Vol.15 pp.22 (pp.1069-1090) ISSN:1869-5590 DOI:10.1007/s13272-024-00758-2
5. A wavenumber dynamic stiffness method for exact and efficient dispersion analysis of plate built-up waveguides
  articolo
  
  Liu, Xiang; Zhou, Weixian; Filippi, Matteo; Wang, Yu
  JOURNAL OF SOUND AND VIBRATION
  Elsevier
  Vol.591 pp.19 ISSN:0022-460X DOI:10.1016/j.jsv.2024.118605
6. Beam finite element models with node dependent kinematics and arbitrary displacement fields over the cross-section
  articolo
  
  Carrera, Erasmo; Scano, Daniele
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  pp.16 (pp.1-16) ISSN:1537-6494 DOI:10.1080/15376494.2024.2434198
7. DYNAMIC ANALYSES OF SANDWICH STRUCTURES THROUGH VARIABLE-FIDELITY BEAM MODELS
  proceeding
  
  Azzara, Rodolfo; Filippi, Matteo; Carrera, Erasmo
  In: Conference proceedings of ASME 2024 International Mechanical Engineering Congress and Exposition
  ASME
  ASME 2024 International Mechanical Engineering Congress and Exposition (Portland, Oregon (USA)) November 17-21, 2024
  pp.8
8. Free vibration analysis of composite beams and laminated reinforced panels by refined dynamic stiffness method and CUF-based component-wise theory
  articolo
  
  Liu, Xiao; Pagani, Alfonso; Carrera, Erasmo; Liu, Xiang
  COMPOSITE STRUCTURES
  Elsevier
  Vol.337 pp.19 ISSN:0263-8223 DOI:10.1016/j.compstruct.2024.118058
9. Synergistic Use of CUF and Machine Learning for Structural Mechanics Problems
  proceeding
  
  Petrolo, M.; Pagani, A.; Carrera, E.; Iannotti, P.; Candita, G.
  In: Proceedings of the Fourth International Congress on Mechanics of Advanced Materials and Structures - ICMAMS
  ICMAMS
  Fourth International Congress on Mechanics of Advanced Materials and Structures - ICMAMS (Bengaluru, India) 11-13 December 2024
10. CUF Multifield Models for Virtual Manufacturing of Composites
  proceeding
  
  Zappino, E.; Zobeiry, N.; Masia, R.; Santori, M.; Carrera, E.; Petrolo, M.
  In: Proceedings of the Fourth International Congress on Mechanics of Advanced Materials and Structures - ICMAMS
  ICMAMS
  Fourth International Congress on Mechanics of Advanced Materials and Structures - ICMAMS (Bengaluru, India) 11-13 December 2024
  pp.2
11. Development of mitigation strategies for process-induced deformations through finite elements
  articolo
  
  Zappino, E.; Masia, R.; Zobeiry, N.; Petrolo, M.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.31 pp.13 (pp.11054-11066) ISSN:1537-6494 DOI:10.1080/15376494.2024.2343326
12. Geometrically nonlinear static analysis of multi-component structures through variable-kinematics finite elements
  articolo
  
  Azzara, R.; Carrera, E.; Chiaia, P.; Filippi, M.; Pagani, A.; Petrolo, M.; Zappino, E.
  ACTA MECHANICA
  Springer
  Vol.235 pp.24 (pp.7003-7026) ISSN:0001-5970 DOI:10.1007/s00707-024-04084-w
13. Thermomechanical analysis of carbon fiber-reinforced polymer representative volume elements with voids
  articolo
  
  Petrolo, M.; Pagani, A.; Trombini, M.; Masia, R.; Carrera, E.
  JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
  Sage
  Vol.43 pp.18 (pp.1375-1392) ISSN:0731-6844 DOI:10.1177/07316844231206956
14. Curing simulation of composites through 1D multi-field finite element models
  proceeding
  
  Zappino, E.; Santori, M.; Zobeiry, N.; Petrolo, M.
  In: Proceedings of the American Society for Composites 39th Annual Technical Conference / 20th US-Japan Conference on Composite Materials
  American Society of Composites
  American Society for Composites 39th Annual Technical Conference / 20th US-Japan Conference on Composite Materials (San Diego, USA) 21-24 October 2024
  pp.13
15. Characterization and Simulation of Advanced Coatings for Space Applications
  proceeding
  
  Mantoan, R.; Zappino, E.; Petrolo, M.; Lorella, E.; Cimino, R.
  In: Proceedings of the 75th International Astronautical Congress (IAC)
  IAF
  75th International Astronautical Congress (IAC) (Milan) 14-18 October 2024
  pp.8
16. Characterization of viscoelastic damping mechanism in a delaminated structure
  articolo
  
  Kiasat Dolatabadi, Shabnam; Salehzadeh Nobari, Ali; Filippi, Matteo; Carrera, Erasmo
  MECHANICAL SYSTEMS AND SIGNAL PROCESSING
  Elsevier
  Vol.219 pp.19 ISSN:0888-3270 DOI:10.1016/j.ymssp.2024.111600
17. INVESTIGATING THE EFFECT OF DELAMINATION-INDUCED FRICTIONAL CONTACT ON THE DYNAMIC BEHAVIOR OF LAMINATE STRUCTURES
  proceeding
  
  Kiasat Dolatabadi, Shabnam; Salehzadeh Nobari, Ali; Filippi, Matteo; Carrera, Erasmo
  ICAS PROCEEDINGS
  In: Titolo del volume non avvalorato
  ICAS
  ICAS PROCEEDINGS 34th Congress of the International Council of the Aeronautical Sciences (Florence, Italy)
  pp.14 ISSN:2958-4647
18. Vibration analysis of rotating variable-angle-tow composite cylindrical structures via high-fidelity shell models
  articolo
  
  Azzara, Rodolfo; Filippi, Matteo; Carrera, Erasmo
  THIN-WALLED STRUCTURES
  Elsevier
  Vol.205 pp.15 ISSN:0263-8231 DOI:10.1016/j.tws.2024.112446
19. Parametric stability analyses of composite reinforced structures
  proceeding
  
  Filippi, Matteo; Azzara, Rodolfo; Carrera, Erasmo
  In: Proceedings of the joint event of the International Conference on the Dynamic Behaviour of Composites (DyCOMP) and European Conference on Crashworthiness of Composite Structures (ECCCS)
  DyCOMP
  DyCOMP2024/ECCCS3 (Enna) 3-5 September 2024
20. Optimization of Variable Stiffness Composites Considering Gaps/Overlaps and Unified Structural Theories
  proceeding
  
  Pagani, Alfonso; Racionero, Alberto; Zamani, Dario
  In: Proceedings of the ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference
  ASME
  ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference (Renton, WA (USA)) April 29 - May 1, 2024
  pp.10 ISBN:9780791887745 DOI:10.1115/ssdm2024-121550
21. Variable kinematics models for the analysis of thermal stresses in metallic and composite laminates
  proceeding
  
  Carrera, E.; Pagani, A.; Zappino, E.; Bracaglia, F.; Scano, D.
  In: Proceedings of the 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2024)
  ECCOMAS
  The 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2024) (Lisbon, Portugal) 3-7 June 2024
22. Least-weight design of variable stiffness composites considering manufacturing signature and unified structural theories
  proceeding
  
  Pagani, A.; Racionero Sanchez-Majano, A.; Zamani Roud Pushti, D.
  In: Proceedings of the 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2024)
  ECCOMAS
  The 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2024) (Lisbon) 3-7 June 2024
23. Thermal buckling of variable stiffness composite laminates using high order plate finite elements
  articolo
  
  Bracaglia, F.; Masia, R.; Pagani, A.; Zappino, E.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.345 pp.13 ISSN:0263-8223 DOI:10.1016/j.compstruct.2024.118393
24. Active aeroelastic flutter control of supersonic smart variable stiffness composite panels using layerwise models
  articolo
  
  Moreira, J. A.; Moleiro, F.; Araújo, A. L.; Pagani, A.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.343 pp.17 ISSN:0263-8223 DOI:10.1016/j.compstruct.2024.118287
25. Impact of printing parameters on in-plane tensile and fracture toughness of fused filament fabricated PEEK
  articolo
  
  Refat, M.; Zappino, E.; Pagani, A.
  PROGRESS IN ADDITIVE MANUFACTURING
  Springer
  Vol.9 pp.15 (pp.1997-2011) ISSN:2363-9512 DOI:10.1007/s40964-023-00554-0
26. Multi-scale analysis of thermal conductivity of graphene foam/PDMS composites
  articolo
  
  Khosravani, Sajedeh; Sadr, Mohammad Homayoune; Carrera, Erasmo; Pagani, Alfonso; Masia, Rebecca
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  TAYLOR & FRANCIS
  Vol.31 pp.13 (pp.8343-8355) ISSN:1537-6494 DOI:10.1080/15376494.2023.2257976
27. 2D higher-order theories for progressive damage model of composite structures based on Hashin and Puck failure criteria
  proceeding
  
  Tortorelli, E.; Saputo, S.; Carrera, E.
  MATERIALS RESEARCH PROCEEDINGS
  In: Aerospace Science and Engineering – IV Aerospace PhD-Days
  Materials Research Forum LLC.
  IV Aerospace PhD-Days
  Vol.42 pp.5 (pp.61-65) ISSN:2474-395X DOI:10.21741/9781644903193-14
28. Higher-order 1D stick models for the flutter analysis of aircraft structures
  proceeding
  
  Zappino, E.; Santori, M.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 34th Congress of the International Council of the Aeronautical Sciences (ICAS)
  ICAS
  34th Congress of the International Council of the Aeronautical Sciences (ICAS) (Florence (ITA)) 9-13 September 2024
  pp.11
29. Coupled thermoelastic analysis of beam structures using a refined 1D finite element model
  proceeding
  
  Filippi, M.; Azzara, R.; Santori, M.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 34th Congress of the International Council of the Aeronautical Sciences (ICAS)
  ICAS
  34th Congress of the International Council of the Aeronautical Sciences (ICAS) (Florence (ITA)) 9-13 September 2024
  pp.10
30. Numerical analysis of process-induced deformations and stresses in aeronautical composite components
  proceeding
  
  Masia, R.; Petrolo, M.; Zappino, E.; Zobeiry, N.; Carrera, E.
  In: Proceedings of the 34th Congress of the International Council of the Aeronautical Sciences (ICAS)
  ICAS
  34th Congress of the International Council of the Aeronautical Sciences (ICAS) (Florence (ITA)) 9-13 September 2024
  pp.8
31. Hygro-thermal buckling analysis of FG plate using CUF
  proceeding
  
  Afzali, Majid; Khosravani, Sajedeh; Carrera, Erasmo
  In: International Conference on Mathematics and Mechanics (ICMM-2024)
  Research Fora
  International Conference on Mathematics and Mechanics (ICMM-2024) (Vancouver, Canada) 5th - 6th July 2024
32. Multifield Micromechanics Analysis of Composites with Defects using CUF
  proceeding
  
  Carrera, E.; Pagani, A.; Petrolo, M.; Masia, R.; Trombini, M.
  In: Proceedings of the 16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics
  WCCM
  16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics (Vancouver) 21-26 July 2024
  pp.1
33. Shear horizontal waves in a multiferroic composite semiconductor structure
  articolo
  
  Yang, Lei; Zappino, Enrico; Carrera, Erasmo; Du, Jianke
  ULTRASONICS
  Elsevier
  Vol.139 pp.15 ISSN:0041-624X DOI:10.1016/j.ultras.2024.107287
34. Rotation effects on propagation of shear horizontal surface waves in piezomagnetic-piezoelectric semiconductor layered structures
  articolo
  
  Yang, Lei; Zappino, Enrico; Carrera, Erasmo; Du, Jianke
  APPLIED MATHEMATICAL MODELLING
  ELSEVIER SCIENCE INC
  Vol.129 pp.15 (pp.494-508) ISSN:0307-904X DOI:10.1016/j.apm.2024.02.020
35. A theory-guided probabilistic machine learning framework for accelerated prediction of process-induced deformations in advanced composites
  proceeding
  
  Schoenholz, C.; Zappino, E.; Petrolo, M.; Zobeiry, N.
  In: Proceedings of the 21st European Conference on Composite Materials (ECCM21)
  The European Society for Composite Materials (ESCM) and the Ecole Centrale de Nantes
  21st European Conference on Composite Materials (ECCM21) (Nantes (FRA)) 2-5 July 2024
  Vol.8 pp.9 ISBN:9782912985019 DOI:10.60691/yj56-np80
36. Mesh objective characteristic element length for higher-order finite beam elements
  articolo
  
  Shen, J.; Arruda, M. R. T.; Pagani, A.; Petrolo, M.
  ADVANCES IN ENGINEERING SOFTWARE
  Elsevier
  Vol.195 pp.13 ISSN:0965-9978 DOI:10.1016/j.advengsoft.2024.103709
37. Geometrically nonlinear transient analyses of rotating structures through high-fidelity models
  articolo
  
  Azzara, Rodolfo; Filippi, Matteo; Carrera, Erasmo
  COMPOSITE STRUCTURES
  Elsevier
  pp.15 ISSN:0263-8223 DOI:10.1016/j.compstruct.2024.118265
38. Transient Thermal Analysis of Space Rectangular Thin-Walled Structures by Carrera Unified Formulation
  articolo
  
  Zhou, Xiaoliang; Masia, Rebecca; Zhu, Rujian; Pagani, Alfonso; Carrera, Erasmo; Chen, Weiqiu
  AIAA JOURNAL
  AMER INST AERONAUTICS ASTRONAUTICS
  Vol.62 pp.8 (pp.2313-2320) ISSN:0001-1452 DOI:10.2514/1.j063671
39. Global/local models of composite laminated structures coupling classical 2D finite elements and arbitrarily large refined analysis subdomains
  articolo
  
  Enea, M.; Augello, R.; Pagani, A.; Carrera, E.
  COMPUTERS & STRUCTURES
  PERGAMON-ELSEVIER SCIENCE
  Vol.298 pp.15 ISSN:0045-7949 DOI:10.1016/j.compstruc.2024.107368
40. Linear and nonlinear topology optimization of origami structures based on crease pattern and axial rigidity
  articolo
  
  Cretella, Vincenzo; Sohouli, Abdolrasoul; Pagani, Alfonso; Suleman, Afzal
  STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
  SPRINGER
  Vol.67 pp.19 ISSN:1615-147X DOI:10.1007/s00158-024-03773-3
41. Wave propagation in Pre-stressed Structures with Geometric Non-linearities through Carrera Unified Formulation
  proceeding
  
  Filippi, M.; Magliacano, D.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 30th AIAA/CEAS Aeroacoustics Conference (2024)
  AIAA
  30th AIAA/CEAS Aeroacoustics Conference (2024) (Rome) 4-7 June 2024
  pp.14 DOI:10.2514/6.2024-3028
42. Variable-kinematics finite elements for propagation analyses of two-dimensional waveguides
  proceeding
  
  Filippi, M.; Magliacano, D.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 30th AIAA/CEAS Aeroacoustics Conference (2024)
  AIAA
  30th AIAA/CEAS Aeroacoustics Conference (2024) (Rome (ITA)) 4-7 June 2024
  pp.8 DOI:10.2514/6.2024-3078
43. Aerospace Science and Engineering IV - Aerospace PhD-Days
  curatela
  
  Alaimo, A.; Esposito, A.; Petrolo, M.
  MATERIALS RESEARCH PROCEEDINGS
  Material Research Forum LLC (STATI UNITI D'AMERICA)
  Vol.42 pp.209 ISSN:2474-395X ISBN:9781644903186 DOI:10.21741/9781644903193
44. Multidimensional finite element models for geometrically nonlinear dynamic analyses of rotating blades
  proceeding
  
  Azzara, R.; Filippi, M.; Carrera, E.
  In: Conference Proceedings of Proceedings of the ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024
  SSDM2024
  ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 (Renton, WA, USA) April 29 - May 1, 2024
45. High-order effects on the vibration of membrane structures
  articolo
  
  Pagani, A.; Valente, M; Azzara, R.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.31 pp.14 (pp.13168-13181) ISSN:1537-6532 DOI:10.1080/15376494.2024.2334363
46. Rotordynamic analyses of stiffened cylindrical structures using high-fidelity shell models
  articolo
  
  Azzara, R.; Filippi, M.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Ltd.
  Vol.31 pp.10 (pp.11677-11686) ISSN:1537-6532 DOI:10.1080/15376494.2024.2309655
47. Evaluation of the effects of the seismic wave incidence angle on soil-structure interactions via advanced finite beam elements
  articolo
  
  Li, X. Z; Song, Y. Q; Filippi, M.; Azzara, R.; Yang, Z. L; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Ltd.
  Vol.31 pp.14 (pp.103-116) ISSN:1537-6532 DOI:10.1080/15376494.2023.2226963
48. Efficient analysis of composites manufacturing using multi-fidelity simulation and probabilistic machine learning
  articolo
  
  Schoenholz, C.; Zappino, E.; Petrolo, M.; Zobeiry, N.
  COMPOSITES. PART B, ENGINEERING
  Elsevier
  Vol.280 pp.8 ISSN:1359-8368 DOI:10.1016/j.compositesb.2024.111499
49. Multiscale finite element models for the analysis, design and optimisation of variable stiffness composites
  tesi dottorato
  
  RACIONERO SANCHEZ-MAJANO, Alberto
  Politecnico di Torino
  pp.190 (pp.1-190)
50. Selection of beam, plate, and shell theories using an axiomatic/asymptotic method and neural networks
  proceeding
  
  Petrolo, M.; Iannotti, P.; Pagani, A.; Carrera, E.
  In: Proceedings of the ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington
  ASME
  ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington (Renton, WA, USA) 29 April - 1 May 2024
  pp.9
51. Accurate prediction of process-induced deformations in composites using layer-wise models and theory-guided probabilistic machine learning
  proceeding
  
  Schoenholz, C.; Zappino, E.; Petrolo, M.; Zobeiry, N.
  In: Proceedings of the ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington
  ASME
  ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington (Renton, WA, USA) 29 April - 1 May 2024
  pp.9
52. Layer-Wise modeling of temperature distributions and degree of cure to evaluate process-induced deformation and residual stress
  proceeding
  
  Zappino, E.; Petrolo, M.; Santori, M.
  In: Proceedings of the ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington
  ASME
  ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington (Renton, WA, USA) 29 April - 1 May 2024
  pp.8
53. Rapid numerical assessment of process-induced dimensional changes and residual stresses in large aerospace composite parts
  proceeding
  
  Zappino, E.; Zobeiry, N.; Masia, R.; Petrolo, M.
  In: Proceedings of the ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington
  ASME
  ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference SSDM2024 April 29 - May 1, 2024, Renton, Washington (Renton, WA, USA) 29 April - 1 May 2024
  pp.6
54. Use of the 3D Equilibrium Equations in the Free‑Edge Analyses for Laminated Structures with the Variable Kinematics Approach
  articolo
  
  Scano, D.; Carrera, E.; Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.103 pp.17 (pp.179-195) ISSN:2524-6968 DOI:10.1007/s42496-023-00177-2
55. Dynamic stiffness method and CUF-based component-wise theories applied to free vibration analysis of solid beams, thin-walled structures and reinforced panels
  articolo
  
  Liu, Xiao; Pagani, Alfonso; Carrera, Erasmo; Liu, Xiang
  THIN-WALLED STRUCTURES
  Elsevier Ltd
  Vol.198 pp.19 ISSN:0263-8231 DOI:10.1016/j.tws.2024.111707
56. A high‐order shell finite element for the large deformation analysis of soft material structures
  articolo
  
  Pagani, A.; Augello, R.; Carrera, E.
  INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
  WILEY
  Vol.125 pp.16 ISSN:0029-5981 DOI:10.1002/nme.7417
57. A consistent crack bandwidth for higher-order beam theories: Application to concrete
  articolo
  
  Shen, Jiahui; Tiago Arruda, Mário Rui; Pagani, Alfonso
  INTERNATIONAL JOURNAL OF DAMAGE MECHANICS
  SAGE PUBLICATIONS LTD
  Vol.33 pp.24 (pp.269-292) ISSN:1056-7895 DOI:10.1177/10567895231215557
58. A machine learning approach to evaluate the influence of higher-order generalized variables on shell free vibrations
  articolo
  
  Petrolo, M.; Iannotti, P.; Trombini, M.; Pagani, A.; Carrera, E.
  JOURNAL OF SOUND AND VIBRATION
  Elsevier
  Vol.575 pp.21 ISSN:0022-460X DOI:10.1016/j.jsv.2024.118255
59. A regularized higher-order beam elements for damage analysis of reinforced concrete beams
  articolo
  
  Shen, J.; Arruda, M. R. T.; Pagani, A.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Ltd.
  Vol.31 pp.13 (pp.79-91) ISSN:1537-6494 DOI:10.1080/15376494.2023.2245825
60. Layerwise models for supersonic flutter analysis of viscoelastic sandwich panels with curvilinear fibre composite skins
  articolo
  
  Moreira, Ja; Moleiro, F; Araújo, Al; Pagani, A
  JOURNAL OF SOUND AND VIBRATION
  ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD
  Vol.572 pp.19 ISSN:0022-460X DOI:10.1016/j.jsv.2023.118182
61. Vibration of solid and thin-walled slender structures made of soft materials by high-order beam finite elements
  articolo
  
  Pagani, A.; Chiaia, P.; Carrera, E.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.160 pp.18 ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2023.104634
62. Legendre-based node-dependent kinematics shell models for the global–local analysis of homogeneous and layered structures
  articolo
  
  Carrera, E.; Pagani, A.; Scano, D.
  INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
  Elsevier Ltd
  Vol.289 pp.11 ISSN:0020-7683 DOI:10.1016/j.ijsolstr.2023.112630
63. 1D higher-order theories for quasi-static progressive failure analysis of composites based on a full 3D Hashin orthotropic damage model
  articolo
  
  Trombini, M.; Enea, M.; Arruda, M. R. T.; Pagani, A.; Petrolo, M.; Carrera, E.
  COMPOSITES. PART B, ENGINEERING
  Elsevier
  Vol.270 pp.13 ISSN:1359-8368 DOI:10.1016/j.compositesb.2023.111120
64. Thermal stress analysis of variable angle tow composite plates through high-order structural models
  articolo
  
  Pagani, A.; Zappino, E.; Bracaglia, F.; Masia, R.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.327 pp.15 ISSN:0263-8223 DOI:10.1016/j.compstruct.2023.117668
65. Analysis of transversely isotropic compressible and nearly-incompressible soft material structures by high order unified finite elements
  articolo
  
  Chiaia, Piero; Pagani, Alfonso; Cinefra, Maria; Carrera, Erasmo
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.31 pp.17 (pp.9451-9467) ISSN:1537-6494 DOI:10.1080/15376494.2023.2273962
66. Rotordynamic analyses with variable-kinematic beam and shell finite elements
  articolo
  
  Filippi, Matteo; Azzara, Rodolfo; Carrera, Erasmo
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  pp.13 (pp.1-13) ISSN:1537-6494 DOI:10.1080/15376494.2023.2246221
67. Unified three-dimensional finite elements for large strain analysis of compressible and nearly incompressible solids
  articolo
  
  Pagani, A.; Chiaia, P.; Filippi, M.; Cinefra, M.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.31 pp.21 (pp.117-137) ISSN:1537-6494 DOI:10.1080/15376494.2023.2229832
2023
1. An analysis of band gap characteristics of metamaterial plates with dual helix cells
  articolo
  
  Chen, Yumei; Fang, Xiang; Wang, Ji; Filippi, Matteo; Carrera, Erasmo
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.31 pp.11 (pp.92-102) ISSN:1537-6532 DOI:10.1080/15376494.2023.2218361
2. Finite element models with node-dependent kinematics based on Legendre polynomials for the global–local analysis of compact and thin walled beams
  articolo
  
  Zappino, E.; Scano, D.; Carrera, E.
  COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
  Elsevier
  Vol.415 pp.23 ISSN:0045-7825 DOI:10.1016/j.cma.2023.116212
3. Unified hexahedral finite elements for large strains analysis of compressible and nearly incompressible materials
  proceeding
  
  Pagani, A.; Chiaia, P.; Filippi, M.; Cinefra, M.
  In: Proceedings of the International Conference on Advanced Topics in Mechanics of Materials, Structures and Constructions (AToMech1)
  AToMech
  International Conference on Advanced Topics in Mechanics of Materials, Structures and Constructions (AToMech1) (Khobar, Saudi Arabia) March 12-14, 2023
4. Global/local and coupled FE-PD models for progressive failure analysis
  proceeding
  
  Pagani, A.; Enea, M.; Carrera, E.
  In: Proceedings of the International Conference on Advanced Topics in Mechanics of Materials, Structures and Constructions (AToMech1)
  AToMech
  International Conference on Advanced Topics in Mechanics of Materials, Structures and Constructions (AToMech1) (Khobar, Saudi Arabia) March 12-14, 2023
5. Impact of Climate Change on Aeronautics and Aviation
  proceeding
  
  Carrera, E.; Pagani, A.; Valente, M.; Bagassi, S.; Corsi, M.
  In: Proceedings of the IAF Global Space Conference on Climate Change (GLOC 2023)
  IAF
  IAF Global Space Conference on Climate Change (GLOC 2023) (Oslo, Norway) 23-25 May 2023
6. Analysis of the manufacturing signature on AFP-manufactured variable stiffness composites'
  proceeding
  
  Pagani, A.; Racionero Sanchez-Majano, A.
  In: Aeronautics and Astronautics AIDAA XXXVII International Congress
  Materials Research Forum LLC
  AIDAA XXXVII International Congress (Padua) September 4-7, 2023
  Vol.37 pp.4 (pp.317-320) DOI:10.21741/9781644902813-69
7. High-order embedded finite elements for the component-wise analysis of composite laminated structures
  proceeding
  
  Racionero Sanchez-Majano, A.; Pagani, A.
  In: PROCEEDINGS OF THE AMERICAN SOCIETY FOR COMPOSITES-THIRTY-EIGHTH TECHNICAL CONFERENCE
  Not specified
  American Society for Composites Thirty-Eighth Technical Conference (Woburn, MA, United States) September 18-20, 2023
  DOI:10.12783/asc38/36543
8. Modeling of micro- to macro-scale uncertain and deterministic defects of variable stiffness composites
  proceeding
  
  Pagani, A.; Racionero Sanchez-Majano, A.
  In: Not specified
  Not specified
  3rd International Conference on Mechanics of Advanced Materials and Structures
9. Thermal buckling analysis and optimization of VAT structures via layer-wise models
  proceeding
  
  Pagani, A.; Zappino, E.; Masia, R.; Bracaglia, F.; Carrera, E.
  MATERIALS RESEARCH PROCEEDINGS
  In: Aeronautics and Astronautics - AIDAA XXVII International Congress (AIDAA 2023)
  Materials Research Forum LLC (STATI UNITI D'AMERICA)
  Italian Association of Aeronautics and Astronautics - XXVII International Congress (AIDAA 2023) (Padua, Italy) 4-7 September, 2023
  Vol.37 pp.4 (pp.300-303) ISSN:2474-395X DOI:10.21741/9781644902813-65
10. A refined one-dimensional model for the nonlinear analysis of smart structures
  proceeding
  
  Zappino, E.; Pagani, A.; Zhu, F.; Carrera, E.; Chen, W. Q.
  In: Proceedings of the 10th ECCOMAS Thematic Conference on Smart Structures and Materials (smart2023)
  ECCOMAS
  10th ECCOMAS Thematic Conference on Smart Structures and Materials (smart2023) (Patras, Grece) 3-6 July, 2023
11. Small amplitude free vibration of soft materials and structures by high order finite elements
  proceeding
  
  Pagani, A.; Chiaia, P.; Carrera, E.
  In: Proceedings of the 13th International Symposium on Vibrations of Continuous Systems (ISVCS13)
  ISVCS
  13th International Symposium on Vibrations of Continuous Systems (ISVCS13) (Pomeroy, Alberta, Canada) July 30 - August 4, 2023
12. Numerical Analysis of Reinforced Concrete Beam using Carrera Unified Formulation based on a Concrete Damage Model
  proceeding
  
  Shen, J.; Augello, R.; Enea, M.; Pagani, A.; Arruda, M. R.; Carrera, E.
  In: Proceedings of the 26th International Conference on Composite Structures (ICCS26) & 8th International Conference on Mechanics of Composites (MECHCOMP8)
  ICCS26
  ICCS26 - 26th International Conference on Composite Structures, MECHCOMP8 8th International Conference on Mechanics of Composites (Porto, Portugal) 27-30 June, 2023
13. Characterisation of thermoelastic properties of heterogeneous materials using unified beam theories and the mechanics of structure genome
  proceeding
  
  Racionero Sanchez-Majano, A.; Masia, R.; Pagani, A.; Carrera, E.
  In: Titolo volume non avvalorato
  Elsevier
  ICCS26-26th International Conference on Composite Structures, MECHCOMP8 8th International Conference on Mechanics of Composites (Porto, Portugal) 27-30 Giugno
14. Folding simulation of TRAC longerons via unified one-dimensional finite elements
  proceeding
  
  Augello, R.; Carrera, E.; Pagani, A.; Pellegrino, S.
  MATERIALS RESEARCH PROCEEDINGS
  In: Aeronautics and Astronautics
  Association of American Publishers
  AIDAA XXVII international Congress (Padova) 4 - 7 September 2023
  Vol.37 pp.6 (pp.357-362) ISSN:2474-3941 DOI:10.21741/9781644902813-79
15. Effect of different material on the folding of composite ultrathin tape spring hinges via unifed 2D shell models
  articolo
  
  Augello, Riccardo; Pagani, Alfonso; Carrera, Erasmo.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Ltd.
  Vol.31 pp.4 (pp.7617-7620) ISSN:1537-6494 DOI:10.1080/15376494.2023.2248118
16. Modified hyper-viscoelastic damage evolution constitutive model for polyurethane materials–an experimental and numerical investigation
  articolo
  
  Jahanmardi, M.; Hosseini-Toudeshky, H.; Goodarzi, M. S.; Carrera, E.; Pagani, A.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Ltd.
  Vol.31 pp.12 (pp.3666-3677) ISSN:1537-6494 DOI:10.1080/15376494.2023.2182006
17. Nonlinearities and high-order effects on membranes vibration
  proceeding
  
  Pagani, A.; Azzara, R.; Valente, M.; Carrera, E.
  In: Proceedings of the International Astronautical Congress, IAC
  International Astronautical Federation, IAF
  74th International Astronautical Congress, IAC 2023 (Baku, Azerbaijan) 2-6 October 2023
  Vol.2023-October
18. Nonlinear transient analyses of composite and sandwich structures via high-fidelity beam models
  proceeding
  
  Filippi, M.; Azzara, R.; Carrera, E.
  In: 27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023
  Association of American Publishers
  27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023 (Padua, Italy) 4-7 September 2023
  Vol.37 pp.4 (pp.239-242) DOI:10.21741/9781644902813-52
19. Variable-kinematic finite elements for dynamics analyses of rotating structures
  proceeding
  
  Filippi, M.; Azzara, R.; Carrera, E.
  In: Conference Proceedings of the 13th International Symposium on Vibrations of Continuous Systems - ISVCS13
  ISVCS13
  13th International Symposium on Vibrations of Continuous Systems - ISVCS13 (Pomeroy, Kananaskis Mountain Lodge, Alberta, Canada) 30 July - 4 August 2023
20. High-fidelity multidimensional models for stress and dynamic analyses of advanced helicopter blades
  proceeding
  
  Filippi, M.; Azzara, R.; Carrera, E.
  In: Proceedings of the Aerospace Europe Conference 2023 - 10th EUCASS - 9th CEAS
  10th EUCASS - 9th CEAS
  Aerospace Europe Conference 2023 - 10th EUCASS - 9th CEAS (Lausanne, Switzerland) 9-13 July 2023
21. Geometrically nonlinear transient analysis through direct and reduced order methods
  proceeding
  
  Azzara, R.; Filippi, M.; Pagani, A.; Carrera, E.
  In: Conference Proceedings of the ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference (SSDM2023)
  SSDM2023
  ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference (SSDM2023) (San Diego, California, USA) 19-21 June 2023
22. Rotordynamic analyses with variable-kinematic beam and shell finite elements
  proceeding
  
  Filippi, M.; Azzara, R.; Carrera, E.
  In: Conference Proceedings of International Conference on Advanced Topics in Mechanics of Materials, Structures and Construction (AtoMech-1)
  AtoMech-1
  International Conference on Advanced Topics in Mechanics of Materials, Structures and Construction (AtoMech-1) (Al Khobar, Saudi Arabia) 12-14 March 2023
23. Nonlinear thermal post-buckling analysis of rectangular FG plates using CUF
  articolo
  
  Afzali, M.; Farrokh, M.; Carrera, E.
  COMPOSITE STRUCTURES
  ELSEVIER SCI LTD
  Vol.321 pp.10 ISSN:0263-8223 DOI:10.1016/j.compstruct.2023.117282
24. A proposal for quality monitoring in the shipyard panel line
  proceeding
  
  Maisano, DOMENICO AUGUSTO FRANCESCO; Trombini, Mattia; Pagani, Alfonso
  In: Advanced Mathematical and Computational Tools in Metrology and Testing 2023
  IMEKO
  Advanced Mathematical and Computational Tools in Metrology and Testing 2023 (Sarajevo) 26-28 September 2023
25. AIDAA News #19
  editoriale
  
  Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.102 pp.5 ISSN:2524-6968 DOI:10.1007/s42496-023-00162-9
26. AIDAA News #18
  editoriale
  
  Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.102 pp.2 ISSN:2524-6968 DOI:10.1007/s42496-023-00156-7
27. AIDAA News #17
  editoriale
  
  Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.102 pp.3 ISSN:2524-6968 DOI:10.1007/s42496-023-00147-8
28. Aeronautics and Astronautics, AIDAA XXVII International Congress
  curatela
  
  De Rosa, S.; Petrolo, M.; Zaccariotto, M.
  Materials Research Forum LLC
  pp.805 ISBN:9781644902813
29. Node-dependent kinematic models applied to reinforced concrete structures
  articolo
  
  Augello, Riccardo; Carrera, Erasmo; Pagani, Alfonso; Arruda, Màrio R. T.; Shen, Jiahui
  MATHEMATICS AND MECHANICS OF COMPLEX SYSTEMS
  MSP
  Vol.11 pp.25 (pp.19-43) ISSN:2326-7186 DOI:10.2140/memocs.2023.11.19
30. Finite elements based on Jacobi shape functions for the free vibration analysis of beams, plates, and shells
  articolo
  
  Carrera, E.; Scano, D.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  pp.9 (pp.1-9) ISSN:1537-6532 DOI:10.1080/15376494.2023.2219438
31. Thermoelastic micromechanical analysis of CFRP with voids
  proceeding
  
  Trombini, M.; Masia, R.; Pagani, A.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites - COMPOSITES 2023
  ECCOMAS
  9th ECCOMAS Thematic Conference on the Mechanical Response of Composites - COMPOSITES 2023 (Trapani) 12-14 September 2023
  pp.1
32. Refinement of Structural Theories for Composite Shells through Convolutional Neural Networks
  proceeding
  
  Petrolo, M.; Iannotti, P.; Trombini, M.; Melis, M.
  In: Proceedings of the 27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023
  AIDAA (ITALIA)
  27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023 (Padova) 4-7 September 2023
  pp.5 DOI:10.21741/9781644902813-31
33. Refined structural theories for dynamic and fatigue analyses of structure subjected to random excitations
  proceeding
  
  Filippi, M.; Tortorelli, E.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023
  AIDAA (ITALIA)
  27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023 (Padova) 4-7 September 2023
  pp.4
34. AN ANALYTICAL TOOL FOR STUDYING THE IMPACT OF PROCESS PARAMETERS ON THE MECHANICAL RESPONSE OF COMPOSITES
  proceeding
  
  Zappino, E.; Petrolo, M.; Masia, R.; Santori, M.; Zobeiry, N.
  In: Proceedings of the 27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023
  AIDAA (ITALIA)
  27th Congress of the Italian Association of Aeronautics and Astronautics, AIDAA 2023 (Padova) 4-7 September 2023
  pp.5
35. Aerospace Science and Engineering – III Aerospace PhD-Days
  curatela
  
  Bagassi, S.; Modenini, D.; Petrolo, M.
  MATERIALS RESEARCH PROCEEDINGS
  Sara Bagassi, Dario Modenini, Marco Petrolo
  Vol.33 pp.409 ISSN:2474-395X ISBN:9781644902677
36. Equivalent single layer and layerwise models for flutter and buckling analysis of supersonic variable stiffness laminated composite plates
  articolo
  
  Moreira, J. A.; Moleiro, F.; Araújo, A. L.; Pagani, A.
  THIN-WALLED STRUCTURES
  ELSEVIER SCI LTD
  Vol.191 pp.13 ISSN:0263-8231 DOI:10.1016/j.tws.2023.111012
37. Best Theory Diagrams for Laminated Composite Shells Based on Failure Indexes
  articolo
  
  Petrolo, M.; Iannotti, P.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.102 pp.20 (pp.199-218) ISSN:2524-6968 DOI:10.1007/s42496-023-00158-5
38. Voids effect on micromechanical response of elastoplastic fiber-reinforced polymer composites using 1D higher-order theories
  articolo
  
  Petrolo, M.; Pagani, A.; Trombini, M.; Carrera, E.
  MECHANICS OF MATERIALS
  Elsevier
  Vol.184 pp.14 ISSN:0167-6636 DOI:10.1016/j.mechmat.2023.104747
39. Finite elements based on Jacobi shape functions for the analysis of beams, plates and shells
  articolo
  
  Pagani, Alfonso; Carrera, Erasmo; Scano, Daniele; Augello, Riccardo
  INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
  Wiley
  pp.30 ISSN:0029-5981 DOI:10.1002/nme.7316
40. Unified plate finite elements for the large strain analysis of hyperelastic material structures
  articolo
  
  Augello, R.; Carrera, E.; Filippi, M.; Pagani, A.; Tortorelli, E.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.155 pp.9 ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2023.104465
41. Buckling and Fundamental Frequency Optimization of Tow-Steered Composites Using Layerwise Structural Models
  articolo
  
  RACIONERO SANCHEZ-MAJANO, Alberto; Pagani, Alfonso
  AIAA JOURNAL
  AMER INST AERONAUTICS ASTRONAUTICS
  pp.15 (pp.1-15) ISSN:0001-1452 DOI:10.2514/1.J062976
42. High-fidelity modeling approaches for the analysis of reinforced structures using one-, two- and three-dimensional elements
  articolo
  
  Zappino, E.; Cavallo, T.; Pagani, A.; Carrera, E.
  CEAS AERONAUTICAL JOURNAL
  Springer
  Vol.14 pp.21 (pp.413-433) ISSN:1869-5590 DOI:10.1007/s13272-023-00648-z
43. High-Fidelity Stress Fields in Contact Problems using Beam, Plates, and Shells Layer-Wise Models
  proceeding
  
  Saputo, S.; Petrolo, M.; Pagani, A.; Carrera, E.
  In: Book of Abstracts of the VII International Conference on Computational Contact Mechanics, ICCCM 2023
  ECCOMAS
  VII International Conference on Computational Contact Mechanics, ICCCM 2023 (Torino) 5-7 July 2023
  pp.1
44. Global-local modeling of composite structures through node-dependent kinematics and convolutional neural networks
  proceeding
  
  Petrolo, M.; Iannotti, P.; Trombini, M.; Melis, M.
  In: Book of Abstracts of the ICCS26 - 26th International Conference on Composite Structures & MECHCOMP8 - 8th International Conference on Mechanics of Composites
  António J.M. Ferreira
  ICCS26 - 26th International Conference on Composite Structures & MECHCOMP8 - 8th International Conference on Mechanics of Composites (Porto) 27-30 June 2023
45. Refined structural theories for dynamic analysis of composite structures subjected to random excitation
  proceeding
  
  Tortorelli, E.; Filippi, M.; Pagani, A.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 9th International Conference on Fatigue of Composites, ICFC9
  Marino Quaresimin
  9th International Conference on Fatigue of Composites, ICFC9 (Vicenza) 21-23 June 2023
  pp.13
46. Low-Velocity Impact Analysis of Stiffened Composite Plates Using Higher-Order Layer-Wise Models
  proceeding
  
  Saputo, S.; Nagaraj, M. H.; Pagani, A.; Petrolo, M.; Carrera, E.
  In: Proceedings of the ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM2023, June 19-21, 2023, San Diego, California
  ASME
  ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM2023 (San Diego) 19-21 June 2023
  pp.1
47. Are There Cases in Which Classical Beam Theories Fail to Compute the Fundamental Frequency?
  proceeding
  
  Carrera, E.; Augello, R.; Petrolo, M.
  In: Proceedings of the ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM2023, June 19-21, 2023, San Diego, California
  ASME
  ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM2023 (San Diego) 19-21 June 2023
  pp.5 DOI:10.1115/ssdm2023-107271
48. An Optimization Strategy Based on Machine Learning and LayerWise Models to Minimize Process-Induced Deformations in CFRP Parts
  proceeding
  
  Zobeiry, N; Zappino, E.; Schoenholz, C.; Masia, R.; Petrolo, M.
  In: Proceedings of the ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM2023, June 19-21, 2023, San Diego, California
  ASME
  ASME 2023 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM2023 (San Diego) 19-21 June 2023
  pp.6
49. Hygro-elasticity and moisture diffusivity analysis of periodically heterogeneous materials by hierarchical microscale models
  articolo
  
  Masia, R.; Racionero Sanchez-Majano, A.; Pagani, A.
  INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
  Elsevier Ltd
  Vol.273 pp.12 ISSN:0020-7683 DOI:10.1016/j.ijsolstr.2023.112231
50. High-Fidelity 1D and 2D Models for Static and Dynamic Analyses of Wind Turbine Rotor Blades
  proceeding
  
  Azzara, R.; Filippi, M.; Petrolo, M.
  In: Proceedings of the Wind Energy Science Conference 2023
  EAWE
  Wind Energy Science Conference 2023 (Glasgow) 23-26 May 2023
  pp.1
51. Numerical approach to disbonds in bonded composite Single Lap Joints: Comparison between Carrera Unified Formulation and classical Finite Element modeling
  articolo
  
  Nicassio, F.; Cinefra, M.; Scarselli, G.; Filippi, M.; Pagani, A.; Carrera, E.
  THIN-WALLED STRUCTURES
  Elsevier
  Vol.188 pp.11 ISSN:0263-8231 DOI:10.1016/j.tws.2023.110813
52. Vibration analysis of thermally loaded isotropic and composite beam and plate structures
  articolo
  
  Azzara, R; Carrera, E; Filippi, M; Pagani, A
  JOURNAL OF THERMAL STRESSES
  TAYLOR & FRANCIS INC
  Vol.46 pp.18 (pp.369-386) ISSN:0149-5739 DOI:10.1080/01495739.2023.2188399
53. OPTIMAL LAY-UPS TO MINIMIZE PROCESS-INDUCED DEFORMATIONS IN L-SHAPED CFRP PARTS
  proceeding
  
  Zappino, E.; Schoenholz, C.; Masia, R.; Zobeiry, N.; Petrolo, M.
  In: Proceedings of SAMPE 2023 Conference
  SAMPE
  SAMPE 2023 Conference (Seattle) 17-20 April 2023
  pp.11 DOI:10.33599/nasampe/s.23.0143
54. Best kinematics for shell finite elements using convolutional neural networks
  articolo
  
  Petrolo, M.; Iannotti, P.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.30 pp.11 (pp.1106-1116) ISSN:1537-6532 DOI:10.1080/15376494.2022.2111009
55. Special issue on the design, modelling and experiments of advanced structuresand systems
  editoriale
  
  Alaimo, A.; Milazzo, A.; Petrolo, M.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.30 pp.1 ISSN:1537-6532 DOI:10.1080/15376494.2022.2146867
56. Layer-wise structural theories for thermomechanical modeling of process-induced defects in CFRP parts
  proceeding
  
  Petrolo, M.; Zappino, E.
  In: Proceedings of the 4th National Congress on Thermal Stresses
  Weiguo Li, Ning Hu
  4th National Congress on Thermal Stresses (Chongqing, China) 31/03/2023 - 02/04/2023
  pp.1
57. Classical, Refined, Zig-Zag, Layer-Wise Models and Best Theory Diagrams for Laminated Structures
  capitolo
  
  Carrera, E.; Cinefra, M.; Petrolo, M.
  Mathematical Methods and Models in Composites
  World Scientific
  pp.54 (pp.155-208) ISBN:9781800611870 DOI:10.1142/9781800611887_0004
58. Analytical modeling of panel flutter and active control in supersonic variable stiffness composite laminates
  articolo
  
  Moreira, J. A.; Moleiro, F.; Araujo, A. L.; Pagani, A.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Ltd.
  Vol.30 pp.15 (pp.930-944) ISSN:1537-6494 DOI:10.1080/15376494.2022.2144970
59. Scattering of SH waves by a semi-cylindrical bump in an inhomogeneous half-space
  articolo
  
  Li, Xinzhu; Song, Yunqiu; Yang, Zailin; Carrera, Erasmo
  INTERNATIONAL JOURNAL OF APPLIED MECHANICS
  World Scientific
  Vol.15 pp.19 ISSN:1758-8251 DOI:10.1142/S175882512250034X
60. Nonlinear and Linearized Analysis of Vibrations of Loaded Anisotropic Beam/Plate/Shell Structures
  tesi dottorato
  
  Azzara, Rodolfo
  Politecnico di Torino
  pp.295 (pp.1-295)
61. Nonlinear global/local stress and free-edge analysis of ultra-thin composite deployable booms
  proceeding
  
  Augello, Riccardo; Carrera, Erasmo; Pagani, Alfonso
  Proceedings of the AIAA SciTech Forum and Exposition: The American Institute of Aeronautics and Astronautics (SciTech 2023)
  In: Proceedings of the AIAA SciTech Forum and Exposition: The American Institute of Aeronautics and Astronautics (SciTech 2023)
  ASME (STATI UNITI D'AMERICA)
  AIAA SciTech Forum and Exposition: The American Institute of Aeronautics and Astronautics (SciTech 2023) (National Harbor, MD, USA) January 23-27, 2023
  pp.9 ISBN:9781624106996 DOI:10.1115/SSDM2023-107244
62. Implicit to Explicit Algorithm for ABAQUS Standard User-Subroutine UMAT for a 3D Hashin-Based Orthotropic Damage Model
  articolo
  
  Arruda, M. R. T.; Trombini, M.; Pagani, Alfonso
  APPLIED SCIENCES
  MPDI
  Vol.13 pp.24 ISSN:2076-3417 DOI:10.3390/app13021155
63. Fracture toughness determination and mechanism for mode-I interlaminar failure of 3D-printed carbon-Kevlar composites
  articolo
  
  Dang, Zhilong; Cao, Junchao; Pagani, Alfonso; Zhang, Chao
  COMPOSITES COMMUNICATIONS
  Elsevier
  Vol.39 pp.6 ISSN:2452-2139 DOI:10.1016/j.coco.2023.101532
64. Derivation of Best Theory Diagrams through the use of Failure Indexes
  proceeding
  
  Petrolo, M.; Iannotti, P.; Pagani, A.; Carrera, E.
  In: Proceedings of AIAA SCITECH 2023 Forum
  AIAA
  AIAA SCITECH 2023 Forum (National Harbor) 23-27 January 2023
  pp.8 DOI:10.2514/6.2023-0592
65. Evaluation of transverse shear stresses in layered beams/plates/shells via stress recovery accounting for various CUF-based theories
  articolo
  
  Petrolo, M.; Augello, R.; Carrera, E.; Scano, D.; Pagani, A.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.307 pp.18 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.116625
66. Stochastic characterization of multiscale material uncertainties on the fibre-matrix interface stress state of composite variable stiffness plates
  articolo
  
  Pagani, A.; Petrolo, M.; Racionero Sanchez-Majano, A.
  INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
  Elsevier Ltd
  Vol.183 pp.18 ISSN:0020-7225 DOI:10.1016/j.ijengsci.2022.103787
67. A global–local approach to the high-fidelity impact analysis of composite structures based on node-dependent kinematics
  articolo
  
  Nagaraj, M. H.; Carrera, E.; Petrolo, M.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.304 pp.9 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.116307
68. Refined multilayered beam, plate and shell elements based on Jacobi polynomials
  articolo
  
  Carrera, E.; Augello, R.; Pagani, A.; Scano, D.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.304 pp.16 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.116275
69. Multi-scale analysis of thermoelastic properties of graphene foam/PDMS composites
  articolo
  
  Khosravani, Sajedeh; Homayoune Sadr, Mohammad; Carrera, Erasmo; Pagani, Alfonso; RACIONERO SANCHEZ-MAJANO, Alberto
  COMPUTATIONAL MATERIALS SCIENCE
  Elsevier Ltd
  Vol.216 pp.9 ISSN:0927-0256 DOI:10.1016/j.commatsci.2022.111842
70. Geometrically nonlinear analysis and vibration of in-plane-loaded variable angle tow composite plates and shells
  articolo
  
  Pagani, A.; Azzara, R.; Carrera, E.
  ACTA MECHANICA
  Springer
  Vol.234 pp.24 (pp.85-108) ISSN:0001-5970 DOI:10.1007/s00707-022-03226-2
71. Synthesis, experimental testing and multi-scale modelling of graphene foam/epoxy composite
  articolo
  
  Khosravani, Sajedeh; Homayoune Sadr, Mohammad; Carrera, Erasmo; Pagani, Alfonso
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  TAYLOR & FRANCIS INC
  Vol.30 pp.10 (pp.2477-2486) ISSN:1537-6494 DOI:10.1080/15376494.2022.2055242
72. Numerical simulation of deployable ultra-thin composite shell structures for space applications and comparison with experiments
  articolo
  
  Pagani, Alfonso; Augello, Riccardo; Carrera, Erasmo
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.30 pp.13 (pp.1591-1603) ISSN:1537-6494 DOI:10.1080/15376494.2022.2037173
73. Unified one-dimensional finite element for the analysis of hyperelastic soft materials and structures
  articolo
  
  Pagani, A.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.30 pp.14 (pp.342-355) ISSN:1537-6494 DOI:10.1080/15376494.2021.2013585
2022
1. AIDAA News #16
  editoriale
  
  Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.101 pp.3 ISSN:2524-6968 DOI:10.1007/s42496-022-00144-3
2. AIDAA News #15
  editoriale
  
  Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.101 pp.2 ISSN:2524-6968 DOI:10.1007/s42496-022-00130-9
3. AIDAA News #14
  editoriale
  
  Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.101 pp.2 ISSN:2524-6968 DOI:10.1007/s42496-022-00121-w
4. Multilayered Beam, Plate and Shell Theories with Interlaminar Variables and Lagrange Polynomials
  articolo
  
  Carrera, Erasmo; Augello, Riccardo; Scano, Daniele
  MEMORIE DELL'ACCADEMIA DELLE SCIENZE DI TORINO
  Accademia delle Scienze di Torino
  Vol.Memorie dell’Accademia delle Scienze di Torino, Volume 1 (2022) pp.36 (pp.99-134) ISSN:2974-9913
5. Displacement and strain data-driven damage detection in multi-component and heterogeneous composite structures
  articolo
  
  Pagani, A.; Enea, M.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.31 pp.16 (pp.2053-2068) ISSN:1537-6494 DOI:10.1080/15376494.2022.2149907
6. Flutter analysis of delaminated composite box-beam using higher-order kinematics
  articolo
  
  Bharati, Rb; Filippi, M; Mahato, Pk; Carrera, E
  COMPOSITE STRUCTURES
  ELSEVIER SCI LTD
  Vol.301 pp.8 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.116145
7. Variable Kinematic Shell Finite Elements for Dynamic Analyses of Rotating Structures
  proceeding
  
  Filippi, Matteo; Azzara, Rodolfo; Carrera, Erasmo
  In: Conference proceedings of ASME 2022 International Mechanical Engineering Congress and Exposition
  ASME
  ASME 2022 International Mechanical Engineering Congress and Exposition
  ISBN:9780791886670 DOI:10.1115/IMECE2022-94418
8. NONLINEAR TRANSIENT RESPONSE OF ISOTROPIC AND COMPOSITE STRUCTURES WITH VARIABLE KINEMATIC BEAM AND PLATE FINITE ELEMENTS
  proceeding
  
  Azzara, R.; Filippi, M.; Pagani, A.; Carrera, E.
  In: Conference proceedings of ASME 2022 International Mechanical Engineering Congress and Exposition
  ASME
  ASME 2022 International Mechanical Engineering Congress and Exposition
  Vol.3 ISBN:9780791886656 DOI:10.1115/IMECE2022-94973
9. A series solution for SH wave scattering by irregularly shaped surface topographies
  articolo
  
  Song, Yunqiu; Li, Xinzhu; Yang, Zailin; Carrera, Erasmo; Yang, Yong
  JOURNAL OF EARTHQUAKE ENGINEERING
  Taylor & Francis
  pp.21 ISSN:1559-808X DOI:10.1080/13632469.2022.2112321
10. Dynamic characterization of 3D printed lightweight structures
  articolo
  
  Refat, M.; Zappino, E.; Racionero Sanchez-Majano, A.; Pagani, A.
  ADVANCES IN AIRCRAFT AND SPACECRAFT SCIENCE
  TECHNO-PRESS
  Vol.9 pp.18 (pp.301-318) ISSN:2287-528X DOI:10.12989/aas.2022.9.4.301
11. Numerical nonlinear vibration-buckling investigation of unstiffened and stiffened structures subjected to mechanical and thermal loading
  proceeding
  
  Carrera, E.; Azzara, R.; Filippi, M.; Pagani, A.
  In: Proceedings of the 33rd Congress of the International Council of Aeronautical Sciences (ICAS)
  ICAS
  33rd Congress of the International Council of Aeronautical Sciences (ICAS) (Stockholm, Sweden) 4-9 September, 2022
  pp.10
12. Advanced least weight design optimization of additive manufactured space rover steering brackets
  proceeding
  
  Festa, L. M.; Pagani, A.; Corpino, S.
  In: Proceedings of the 73rd International Astronautical Congress (IAC)
  IAF Astro
  73rd International Astronautical Congress (IAC) (Paris, France) 18-22 September, 2022
  pp.7
13. Virtual testing of folding and deployment of composite ultrathin tape spring hinges via unified 2D shell models
  proceeding
  
  Augello, R.; Carrera, E.; Pagani, A.; Masia, R.
  In: Proceedings of the 73rd International Astronautical Congress (IAC)
  IAF Astro
  73rd International Astronautical Congress (IAC) (Paris, France) 18-22 September, 2022
  pp.4
14. Free edge stress analysis of composite laminates subjected to low-velocity impact using higher-order layer-wise models
  proceeding
  
  Saputo, S.; Nagaraj, M. H.; Pagani, A.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 2nd European Conference on Crashworthiness of Composite Structures
  ISAE-SUPAERO
  2nd European Conference on Crashworthiness of Composite Structures (Tolosa) 14-16 November 2022
  pp.2
15. A second-generation finite element method for the analysis of multifunctional composite structures
  proceeding
  
  Carrera, E.; Filippi, M.; Pagani, A.; Petrolo, M.; Zappino, E.
  In: Proceedings of the 12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons"
  EASN
  12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons" (Barcelona) 18-21 October 2022
  pp.1
16. Advanced non-linear models for the design of deployable composite space structures
  proceeding
  
  Carrera, E.; Filippi, M.; Pagani, A.; Petrolo, M.; Zappino, E.
  In: Proceedings of the 12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons"
  EASN
  12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons" (Barcelona) 18-21 October 2022
  pp.1
17. On the accuracy and efficiency of convolutional neural networks for element-wise refinement of FEM models
  proceeding
  
  Petrolo, M.; Iannotti, P.; Pagani, A.; Carrera, E.
  In: Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30–November 3, 2022, Columbus, OH
  ASME
  ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 (Columbus, Ohio) 30 October 2022 - 3 November 2022
  pp.9
18. Assessment of layerwise user-elements in Abaqus for static and free vibration analysis of variable stiffness composite laminates
  articolo
  
  Moreira, J. A.; Moleiro, F.; Araújo, A. L.; Pagani, A.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.303 pp.11 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.116291
19. NONLINEAR VIBRATION-BUCKLING INVESTIGATION OF UNSTIFFENED AND STIFFENED STRUCTURES SUBJECTED TO MECHANICAL AND THERMAL LOADINGS
  proceeding
  
  Azzara, Rodolfo; Filippi, Matteo; Pagani, Alfonso; Carrera, Erasmo
  In: Proceedings of the International Council of the Aeronautical Sciences (ICAS)
  ICAS
  International Council of the Aeronautical Sciences (ICAS) (Stockholm, Sweden) 4– 9 September 2022
20. Vibration Analysis of Curved Panel Subjected to Internal Pressure and Axial Compression
  articolo
  
  Zhu, Fangzhou; Augello, Riccardo; Azzara, Rodolfo; Pagani, Alfonso; Carrera, Erasmo; Chen, Weiqiu
  AIAA JOURNAL
  AIAA
  pp.12 ISSN:0001-1452 DOI:10.2514/1.J061999
21. Analysis of Thin-Walled Beam and Flexible Plate Structures through the Unified Formulation
  tesi dottorato
  
  Daneshkhah, Ehsan
  Politecnico di Torino
  pp.269 (pp.1-269)
22. Stress and Failure Onset Analysis of Thin Composite Deployables by Global/Local Approach
  articolo
  
  Augello, R.; Pagani, A.; Carrera, E.; Iannotta, D. A.
  AIAA JOURNAL
  AMER INST AERONAUTICS ASTRONAUTICS
  Vol.60 pp.13 (pp.5954-5966) ISSN:0001-1452 DOI:10.2514/1.J061899
23. Microscale thermo-elastic analysis of composite materials by high-order geometrically accurate finite elements
  articolo
  
  Racionero Sanchez-Majano, A.; Masia, R.; Pagani, A.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.300 pp.10 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.116105
24. A virtual manufacturing tool for the prediction of process-induced deformation in thin composite structures
  proceeding
  
  Zappino, E.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 73rd International Astronautical Congress (IAC)
  IAF
  73rd International Astronautical Congress (IAC) (Paris) 18-22 September 2022
  pp.5
25. Layer-wise dynamic analysis of a beam with global and local viscoelastic contributions using an FE/Laplace transform approach
  articolo
  
  Kiasat, Sh.; Filippi, M.; Nobari, A. S.; Carrera, E.
  ACTA MECHANICA
  Springer-Verlag GmbH
  pp.15 ISSN:0001-5970 DOI:10.1007/s00707-022-03349-6
26. Variable-kinematic finite beam elements for geometrically nonlinear dynamic analyses
  articolo
  
  Azzara, Rodolfo; Filippi, Matteo; Pagani, Alfonso
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  pp.9 (pp.1-9) ISSN:1537-6494 DOI:10.1080/15376494.2022.2091185
27. A variable kinematic model for the prediction of capacitance variations in embedded PZT sensors
  articolo
  
  Najd, J.; Zappino, E.; Carrera, E.; Harizi, W.; Aboura, Z.
  JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
  SAGE Publications Ltd
  pp.14 ISSN:1045-389X DOI:10.1177/1045389X221121974
28. Rapid estimation of the fatigue limit of Smart Polymer-Matrix Composites (PMC) using the self-heating tests
  articolo
  
  Najd, J.; Harizi, W.; Aboura, Z.; Zappino, E.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.282 pp.10 ISSN:0263-8223 DOI:10.1016/j.compstruct.2021.115039
29. A Variable Kinematic Multifield Model for the Lamb Wave Propagation Analysis in Smart Panels
  articolo
  
  Najd, J.; Zappino, E.; Carrera, E.; Harizi, W.; Aboura, Z.
  SENSORS
  MDPI
  Vol.22 pp.24 ISSN:1424-8220 DOI:10.3390/s22166168
30. An efficient numerical approach to evaluate process-induced free-edge stresses in laminated composites
  proceeding
  
  Zappino, E.; Zobeiry, N.; Petrolo, M.
  In: Proceedings of the American Society for Composites (ASC) 37th Annual Technical Conference
  ASC
  American Society for Composites (ASC) 37th Annual Technical Conference (Tucson) 19-21 September 2022
  pp.10
31. Optimal element-wise distributions of structural theories from neural networks
  proceeding
  
  Carrera, E.; Petrolo, M.
  In: Proceedings of the The Fourteenth International Conference on Computational Structures Technology
  Elsevier
  The Fourteenth International Conference on Computational Structures Technology (Montpellier) 23-25 August, 2022
  pp.5
32. A global/local element-wise approach for the buckling and post-buckling analysis of thin multilayered structures
  proceeding
  
  Augello, R.; Carrera, E.; Pagani, A.; Petrolo, M.
  In: Proceedings of the International Council of the Aeronautical Sciences, XXXIII International Congress
  ICAS
  International Council of the Aeronautical Sciences XXXIII International Congress (Stockholm) 4– 9 September 2022
  pp.5
33. Thermal buckling solutions of generic metallic and laminated structures: Total and updated Lagrangian formulations via refined beam elements
  articolo
  
  Yan, Yang; Pagani, Alfonso; Carrera, Erasmo
  JOURNAL OF THERMAL STRESSES
  Taylor & Francis
  Vol.45 pp.26 (pp.669-694) ISSN:0149-5739 DOI:10.1080/01495739.2022.2090471
34. Local Refinement of Structural Kinematics for Failure Onset Analysis via Neural Networks
  proceeding
  
  Petrolo, M.; Pagani, A.; Iannotti, P.; Carrera, E.
  In: Book of Abstracts of the 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII)
  International Center for Numerical Methods in Engineering (CIMNE)
  15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII) (Yokohama) 31/07/2022 - 05/08/2022
  pp.1 ISBN:9788412322286
35. Concrete damage analysis based on higher-order beam theories using fracture energy regularization
  articolo
  
  Shen, J.; Arruda, M. R. T.; Pagani, A.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Ltd.
  pp.15 ISSN:1537-6494 DOI:10.1080/15376494.2022.2098430
36. Optimisation of additive-manufactured variable-stiffness composite components
  proceeding
  
  Racionero Sanchez-Majano, A.; Pagani, A.
  In: Proceedings of the 1st International Conference on Advanced Manufacturing for Air, Space and Land Stransportation
  ESA/NASA
  1st International Conference on Advanced Manufacturing for Air, Space and Land Stransportation (Virtual) 7-11 March 2022
37. Advanced finite elements for modelling additive-manufactured composite components
  proceeding
  
  Pagani, A.; Racionero Sanchez-Majano, A.; Zappino, E.; Carrera, E.
  In: Proceedings of the 1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation
  ESA/NASA
  1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation (Virtual) 7-11 March 2022
38. Nonlinear dynamic analyses of isotropic and composite structures using refined and unified one-dimensional finite elements
  proceeding
  
  Azzara, R.; Filippi, M.; Augello, R.; Carrera, E.; Pagani, A.
  In: Proceedings of the International Conference on Nonlinear Solid Mechanics (IConSoM)
  IConSoM
  International Conference on Nonlinear Solid Mechanics (IConSoM) (Alghero, Italy) 13-16 June, 2022
39. High order models for large displacement and large strain analysis of advanced materials and structures
  proceeding
  
  Pagani, A.
  In: Proceedings of the 2nd European – South American Workshop on Composite Materials and Structures (ESACOMP)
  ESACOMP
  2nd European – South American Workshop on Composite Materials and Structures (ESACOMP) (Lima, Peru) June 13-16, 2022
40. Buckling test of stiffened panels: modeling and vibrational correlation testing
  proceeding
  
  Peeters, D.; Pagani, A.; Augello, R.; Carrera, E.; do Prado, A. P.; Cabral, P. H.; Santos, H. E.
  In: Proceedings of the 20th European Conference on Composite Materials (ECCM20)
  ECCM20
  20th European Conference on Composite Materials (ECCM20) (Lausanne, Switzerland) 26-30 June 2022
  pp.8
41. Buckling test of stiffened panels: evaluation of post-buckling and failure by testing and layerwise models
  proceeding
  
  Augello, R.; Pagani, A.; Carrera, E.; Peeters, D.; do Prado, A. P.; Santos, H. E.; Galeb, P. H.; Cabral, P. H.
  In: Proceedings of the 20th European Conference on Composite Materials (ECCM20)
  ECCM20
  20th European Conference on Composite Materials (ECCM20) (Lausanne, Switzerland) 26-30 June 2022
  pp.9
42. Analysis of beam structures by combined 3D peridynamics and refined 1D finite elements
  proceeding
  
  Enea, M.; Scabbia, F.; Pagani, A.; Zaccariotto, M.; Carrera, E.
  In: Proceedings of the 10th Conference on Design, Modelling and Experiments of Advanced Structures and Systems (DeMEASS X)
  DeMEASS X
  Design, Modelling and Experiments of Advanced Structures and Systems (DeMEASS X) (Scopello, Italy) May 1-4, 2022
43. Layerwise mized elements with node-dependent kinematics for analysis of multilayered plates embedding composite and/or viscoelastic layers
  proceeding
  
  Moreira, J. A.; Moleiro, F.; Araùjo, A. L.; Pagani, A.
  In: Proceedings of the 10th Conference on Design, Modelling and Experiments of Advanced Structures and Systems (DeMEASS X)
  DeMEASS X
  Design, Modelling and Experiments of Advanced Structures and Systems (DeMEASS X) (Scopello, Italy) May 1-4, 2022
44. Optimisation of multi-layered structures using a multispecies genetic algorithm and high-order structural models
  proceeding
  
  Racionero Sanchez-Majano, A.; Pagani, A.
  In: Proceedings of the 15th World Congress on Computational Mechanics (WCCM-XV) - 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII)
  WCCM-XV
  15th World Congress on Computational Mechanics (WCCM-XV) - 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII) (Yokohama, Japan) 31 July - 5 August
45. Stochastic microscale stresses prediction of variable angle tow plates considering multiscale defects employing unified finite elements and mechanics of structure genome
  proceeding
  
  Racionero Sanchez-Majano, A.; Pagani, A.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 15th World Congress on Computational Mechanics (WCCM-XV) - 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII)
  WCCM-XV
  15th World Congress on Computational Mechanics (WCCM-XV) - 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII) (Yokohama, Japan) 31 July - 5 August
46. Component-wise fracture analysis through coupled three-dimensional peridynamics and refined one-dimensional finite elements
  proceeding
  
  Enea, M.; Pagani, A.; Carrera, E.
  In: Proceedings of the 15th World Congress on Computational Mechanics (WCCM-XV) - 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII)
  WCCM-XV
  15th World Congress on Computational Mechanics (WCCM-XV) - 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII) (Yokohama, Japan) 31 July - 5 August
47. Damage detection in composites by AI and high-order modelling surface-strain-displacement analysis
  proceeding
  
  Enea, M.; Pagani, A.; Carrera, E.
  In: Proceedings of the 10th European Workshop on Structural Health Monitoring (EWSHM)
  EWSHM
  10th European Workshop on Structural Health Monitoring (EWSHM) (Palermo, Italy) July 4-7, 2022
48. Multiscale thermoelastic analyses of fibre-reinforced composites by high-order unified finite element models
  proceeding
  
  Racionero Sanchez-Majano, A.; Masia, R.; Pagani, A.; Zappino, E.; Carrera, E.
  In: Proceedings of the 25th International Conference on Composite Structures (ICCS25)
  ICCS25
  25th International Conference on Composite Structures (ICCS25) (Porto, Portugal) 19-22 July 2022
49. A-posteriori evaluation of transverse stress components in beams, plates and shells
  proceeding
  
  Augello, R.; Pagani, A.; Carrera, E.; Scano, D.
  In: Proceedings of the 25th International Conference on Composite Structures (ICCS25)
  ICCS25
  25th International Conference on Composite Structures (ICCS25) (Porto, Portugal) 19-22 July 2022
50. Damage Detection of Civil Structures using Artificial Neural Networks and Refined Component-Wise Finite Element Models
  proceeding
  
  Enea, M.; Shen, J.; Pagani, A.; Carrera, E.
  In: Proceedings of the 25th International Conference on Composite Structures (ICCS25)
  ICCS25
  25th International Conference on Composite Structures (ICCS25) (Porto, Portugal) 19-22 July 2022
51. Nonlinear vibration of composite beams, plates and shells subjected to compression and shear loadings by unified finite elements and comparison with VCT experiments
  proceeding
  
  Carrera, E.; Pagani, A.; Augello, R.; Azzara, R.
  In: Proceedings of the 25th International Conference on Composite Structures (ICCS25)
  ICCS25
  25th International Conference on Composite Structures (ICCS25) (Porto, Portugal) 19-22 July 2022
52. Multi-scale reliability-based design optimization of tow-steered composite laminates
  proceeding
  
  Pagani, A.
  In: Proceedings of the 2nd International Conference on Computations for Science and Engineering (ICCSE2)
  ICCSE2
  2nd International Conference on Computations for Science and Engineering (ICCSE2) (Rimini, Italy) 30 August - 2 September, 2022
53. Thermal buckling loads of rectangular FG plates with temperature-dependent properties using Carrera Unified Formulation
  articolo
  
  Afzali, Majid; Farrokh, Mojtaba; Carrera, Erasmo
  COMPOSITE STRUCTURES
  Elsevier
  Vol.295 pp.11 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.115787
54. A global-local approach to the high-fidelity impact analysis of composite structures based on node-dependent kinematics
  proceeding
  
  Nagaraj, N. H.; Carrera, E.; Petrolo, M.
  In: Proceedings of the 25th International Conference on Composite of Structures - ICCS25
  António J.M. Ferreira
  25th International Conference on Composite of Structures - ICCS25 (Porto) 19-22 July 2022
  pp.1
55. Carrera Unified Formulation (CUF) for the analysis of disbonds in Single Lap Joints (SLJ)
  proceeding
  
  Nicassio, Francesco; Cinefra, Maria; Scarselli, Gennaro; Filippi, Matteo; Pagani, Alfonso; Carrera, Erasmo
  In: Proc. SPIE 12047, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XVI
  SPIE
  SPIE Smart Structures + Nondestructive Evaluation (Long Beach, California, United States) 2022
  Vol.12047 pp.12 DOI:10.1117/12.2616542
56. A nonlinear analytical model for tensile failure prediction of pseudo-ductile composite laminates
  articolo
  
  Xiang, Huabo; Zhang, Yinxiao; Chen, Yang; Pagani, Alfonso; Zhang, Chao
  THIN-WALLED STRUCTURES
  Elsevier Ltd
  Vol.179 pp.13 ISSN:0263-8231 DOI:10.1016/j.tws.2022.109711
57. On the role of refined structural theories to improve the computational efficiency of nonlinear analysis of composites
  proceeding
  
  Petrolo, M.; Pagani, A.; Carrera, E.
  In: Proeedings of the International Conference on Nonlinear Solid Mechanics - ICONSOM 2022
  M. Amabili
  International Conference on Nonlinear Solid Mechanics - ICONSOM 2022 (Alghero) 13-16 Giugno 2022
  pp.1
58. Global/local capabilities of MUL2 for the nonlinear analysis of composite structures
  proceeding
  
  Carrera, E.; Nagaraj, M. H.; Petrolo, M.
  In: Proceedings of the 10th Design, Modelling and Experiments of Advanced Structures and Systems Conference - DEMEASS2020
  AIDAA
  10th Design, Modelling and Experiments of Advanced Structures and Systems Conference - DEMEASS2020 (Scopello, Italy) 1-4 May 2022
  pp.2 DOI:10.5281/zenodo.6472318
59. Elastoplastic Micromechanical Analysis of Fiber‑Reinforced Composites with Defects
  articolo
  
  Nagaraj, M. H.; Kaleel, I.; Carrera, E.; Petrolo, M.
  AEROTECNICA MISSILI & SPAZIO
  Aldo Frediani/Springer
  Vol.101 pp.7 (pp.53-59) ISSN:2524-6968 DOI:10.1007/s42496-021-00103-4
60. Virtual design and manufacturing of composite structures using refined kinematic models
  proceeding
  
  Zappino, E.; Petrolo, M.; Carrera, E.
  In: Proceedings of the 1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation
  ESA
  1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation (Online) 7-10 March 2022
  pp.1
61. Exact component-wise solutions for 3D free vibration and stress analysis of hybrid steel-concrete composite beams
  articolo
  
  Shen, J.; Pagani, A.; Arruda, M. R. T.; Carrera, E.
  THIN-WALLED STRUCTURES
  Elsevier Ltd
  Vol.174 pp.13 ISSN:0263-8231 DOI:10.1016/j.tws.2022.109094
62. Large deflection of composite beams by finite elements with node-dependent kinematics
  articolo
  
  Carrera, E.; Pagani, A.; Augello, R.
  COMPUTATIONAL MECHANICS
  Springer
  pp.20 ISSN:0178-7675 DOI:10.1007/s00466-022-02151-4
63. Advanced finite elements and neural networks for scaled models
  proceeding
  
  Carrera, E.; Iannotti, P.; Pagani, A.; Petrolo, M.
  In: Proceedings of the 9th International Symposium on Scale Modeling
  Kozo Saito, Sergio De Rosa, Yuji Nakamura
  9th International Symposium on Scale Modeling (Napoli) 2-4 March 2022
  pp.1
64. Vibration and buckling analysis of curved panel subjected to combined internal pressure and axial compression
  proceeding
  
  Zhu, F.; Augello, R.; Azzara, R.; Pagani, A.; Carrera, E.; Chen, W.
  In: AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022
  American Institute of Aeronautics and Astronautics Inc, AIAA
  AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022 (usa) 2022
  pp.8 ISBN:9781624106316 DOI:10.2514/6.2022-0534
65. Reliability-based design optimization of tow-steered composite plates employing high-order CUF-based finite elements
  proceeding
  
  Racionero Sanchez-Majano, A.; Pagani, A.
  In: AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022
  American Institute of Aeronautics and Astronautics Inc, AIAA
  AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022 (usa) 2022
  pp.11 ISBN:9781624106316 DOI:10.2514/6.2022-0633
66. Nonlinear and linearized vibration analysis of plates and shells subjected to compressive loading
  articolo
  
  Azzara, R.; Carrera, E.; Pagani, A.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.141 pp.9 ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2022.103936
67. Numerical vibration correlation technique for thin-walled composite beams under compression based on accurate refined finite element
  articolo
  
  Yang, H.; Daneshkhah, E.; Augello, R.; Xu, X.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.280 pp.12 ISSN:0263-8223 DOI:10.1016/j.compstruct.2021.114861
68. Refined Structural Theories for the Random Response of Fiber-Reinforced and Sandwich Composite Structures
  proceeding
  
  Filippi, M.; Petrolo, M.; Carrera, E.
  In: AIAA SCITECH 2022 Forum
  AIAA
  AIAA SCITECH 2022 Forum (San Diego, CA & Virtual) 3-7 January 2022
  pp.12
69. Quasi-static fracture analysis by coupled three-dimensional peridynamics and high order one-dimensional finite elements based on local elasticity
  articolo
  
  Pagani, A.; Enea, M.; Carrera, E.
  INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
  John Wiley and Sons Ltd
  Vol.123 pp.16 (pp.1098-1113) ISSN:0029-5981 DOI:10.1002/nme.6890
70. Understanding the critical role of boundary conditions in meso-scale finite element simulation of braided composites
  articolo
  
  Zhao, Z.; Liu, P.; Dang, H.; Chen, Y.; Zhang, C.; Pagani, A.
  ADVANCED COMPOSITES AND HYBRID MATERIALS
  Springer Science and Business Media B.V.
  Vol.5 pp.11 (pp.39-49) ISSN:2522-0136 DOI:10.1007/s42114-021-00284-3
71. Component-wise approach to reinforced concrete structures
  articolo
  
  Carrera, E.; Augello, R.; Pagani, A.; Xu, X.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.29 pp.18 (pp.3871-3888) ISSN:1537-6494 DOI:10.1080/15376494.2021.1912442
72. Static analysis of thin-walled beams accounting for nonlinearities
  articolo
  
  Petrolo, M.; Nagaraj, M. H.; Daneshkhah, E.; Augello, R.; Carrera, E.
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
  SAGE Publications Ltd
  Vol.236 pp.14 (pp.2967-2980) ISSN:0954-4062 DOI:10.1177/09544062211032997
73. Influence of fiber misalignments on buckling performance of variable stiffness composites using layerwise models and random fields
  articolo
  
  Pagani, A.; Racionero Sanchez-Majano, A.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Inc.
  Vol.29 pp.16 (pp.384-399) ISSN:1537-6494 DOI:10.1080/15376494.2020.1771485
2021
1. A novel computational framework for the analysis of bistable composite beam structures
  articolo
  
  De Pietro, G.; Giunta, G.; Hui, Y.; Belouettar, S.; Hu, H.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.257 pp.19 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.113167
2. Periodicity and quasi-periodicity effects on vibration band gaps: numerical investigations on one-dimensional structures
  proceeding
  
  Pecoraro, Alessia; Magliacano, Dario; Petrone, Giuseppe; Filippi, Matteo; Franco, Francesco; DE ROSA, Alessandro
  In: Proceedings of XXVI International Congress of Italian Association of Aeronautics and Astronautics (AIDAA)
  Italian Association of Aeronautics and Astronautics (AIDAA)
  XXVI International Congress of Italian Association of Aeronautics and Astronautics (AIDAA) (Pisa, Italia) 31st August - 3rd September 2021
3. Mechanical and thermal buckling loads of rectangular FG plates by using higher-order unified formulation
  articolo
  
  Farrokh, M.; Afzali, M.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.28 pp.10 (pp.608-617) ISSN:1537-6494 DOI:10.1080/15376494.2019.1578014
4. Node-Dependent Kinematics and Multidimensional Finite Elements for the Analysis of Single/Double Swept, Composite Helicopter Blades
  articolo
  
  Filippi, M; Carrera, E; Giusa, D; Zappino, E
  JOURNAL OF THE AMERICAN HELICOPTER SOCIETY
  AMER HELICOPTER SOC INC
  Vol.66 pp.10 (pp.1-10) ISSN:0002-8711 DOI:10.4050/JAHS.66.032005
5. An Analysis of Surface Acoustic Wave Modes of a Finite Solid Covered with Electrodes by Rayleigh-Ritz Method
  proceeding
  
  Wang, Ji; Wu, Jinghui; Carrera, Erasmo; Li, Honglang
  In: Titolo volume non avvalorato
  IEEE
  IEEE International Ultrasonics Symposium, IUS (Xi'an, China) 11-16 September 2021
  DOI:10.1109/IUS52206.2021.9593312
6. Stress analyses of viscoelastic three-dimensional beam-like structures with low- and high-order one-dimensional finite elements
  articolo
  
  Filippi, M; Carrera, E
  MECCANICA
  SPRINGER
  Vol.56 pp.8 (pp.1475-1482) ISSN:0025-6455 DOI:10.1007/s11012-020-01191-5
7. 3D soil-structure interaction analysis with a combined substructure-FEM under external forces and seismic waves
  articolo
  
  Hayati, Y; Havaei, G; Eslami, A; Filippi, M
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  TAYLOR & FRANCIS INC
  pp.21 (pp.1-34) ISSN:1537-6494 DOI:10.1080/15376494.2021.1909786
8. Flutter analysis of rotary laminated composite structures using higher-order kinematics
  articolo
  
  Bharati, Rb; Mahato, Pk; Filippi, M; Carrera, E
  COMPOSITES. PART C, OPEN ACCESS
  ELSEVIER
  Vol.4 pp.8 ISSN:2666-6820 DOI:10.1016/j.jcomc.2020.100100
9. Stability and transient analyses of asymmetric rotors on anisotropic supports
  articolo
  
  Filippi, M; Carrera, E
  JOURNAL OF SOUND AND VIBRATION
  ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD
  Vol.500 pp.11 ISSN:0022-460X DOI:10.1016/j.jsv.2021.116006
10. Dynamic analyses of viscoelastic three-dimensional structures with advanced one-dimensional finite elements
  articolo
  
  Karatas, Ee; Filippi, M; Carrera, E
  EUROPEAN JOURNAL OF MECHANICS. A, SOLIDS
  ELSEVIER
  Vol.88 pp.7 ISSN:0997-7538 DOI:10.1016/j.euromechsol.2021.104241
11. Vibro-acoustic analysis of composite plate-cavity systems via CUF finite elements
  articolo
  
  Cinefra, M.; Moruzzi, M. C.; Bagassi, S.; Zappino, E.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.259 pp.12 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.113428
12. Geometric nonlinear time response analysis of shell structures by advanced finite elements
  proceeding
  
  Pagani, A.; Wu, B.; Zhu, F.; Carrera, E.; Chen, W. Q.
  In: Proceedings of the International Mechanical Engineering Congress & Exposition (IMECE)
  ASME
  International Mechanical Engineering Congress & Exposition (IMECE) (Virtual) November 1-4, 2021
13. Nonlinear Vibration Correlation and Buckling Analysis of Flat Plates and Shells
  proceeding
  
  Azzara, R.; Carrera, E.; Pagani, A.
  In: Proceedings of the International Mechanical Engineering Congress & Exposition (IMECE)
  ASME
  International Mechanical Engineering Congress & Exposition (IMECE) (Virtual) November 1-4, 2021
  pp.5
14. Free vibration analysis of curved metallic and composite beam structures using a novel variable-kinematic DQ method
  articolo
  
  Yan, Y.; Carrera, E.; Pagani, A.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  pp.21 (pp.1-21) ISSN:1537-6494 DOI:10.1080/15376494.2021.1909784
15. Accuracy and Efficiency of Structural Theories for Free Vibration Analyses via Axiomatic/Asymptotic Method and Neural Networks
  proceeding
  
  Carrera, E.; Petrolo, M.
  In: DSTA-2021 Conference Books - Abstracts
  J. Awrejcewicz, M. Kaźmierczak, J. Mrozowski, P. Olejnik (POLONIA)
  16th Conference on DYNAMICAL SYSTEMS Theory and Applications DSTA 2021 (Lodz, Poland) 6-9 December 2021
  pp.2 ISBN:9788366741201 DOI:10.34658/9788366741201
16. Accurate stress analysis of variable angle tow shells by high-order equivalent-single-layer and layer-wise finite element models
  articolo
  
  Racionero Sanchez-Majano, A.; Azzara, R.; Pagani, A.; Carrera, E.
  MATERIALS
  MDPI
  Vol.14 pp.21 ISSN:1996-1944 DOI:10.3390/ma14216486
17. Global/local and advanced multi-scale simulation of composite TRAC booms
  proceeding
  
  Pagani, A.; Carrera, E.
  In: Proceedings of the 72nd International Astronautical Congress (IAC)
  International Astronautical Federation (IAF)
  72nd International Astronautical Congress (IAC) (Dubai, UAE) 25-29 October, 2021
  pp.5
18. On the role of structural theories on aeroelastic models
  proceeding
  
  Petrolo, M.; Carrera, E.; Filippi, M.; Pagani, A.; Zappino, E.
  In: Proceedings of the Online Symposium on Aeroelasticity, Fluid-Structure Interaction, and Vibrations, 14–15 October 2021, https://www.aeroelasticity2021.com
  Antonio J. M. Ferreira and Flávio Marques
  Online Symposium on Aeroelasticity, Fluid-Structure Interaction, and Vibrations 14–15 October 2021
  pp.1
19. Stress States in Highly Flexible Thin-Walled Composite Structures by Unified Shell Model
  articolo
  
  Pagani, Alfonso; Azzara, Rodolfo; Augello, Riccardo; Carrera, Erasmo
  AIAA JOURNAL
  AIAA
  Vol.59 pp.14 (pp.4243-4256) ISSN:0001-1452 DOI:10.2514/1.J060024
20. Mechanical performance of variable stiffness composite plates subjected to multiscale defects
  proceeding
  
  Pagani, A.; Racionero Sanchez-Majano, A.; Zàrate, I. S.
  In: Proceedings of the American Society for Composites 36th Technical Conference (ASC36)
  American Society for Composites
  American Society for Composites 36th Technical Conference (ASC36) (College Station, TX) September 19 - 21, 2021
  pp.12 (pp.585-596)
21. Damage detection in laminated composites by neural networks and high order finite elements
  proceeding
  
  Pagani, A.; Enea, M.; Carrera, E.
  In: Proceedings of the American Society for Composites 36th Technical Conference (ASC36)
  American Society for Composites
  American Society for Composites 36th Technical Conference (ASC36) (College Station, TX) eptember 19 - 21, 2021
  pp.11 (pp.597-607)
22. Static solution of crack propagation problems by coupled three-dimensional peridynamics and high-order one-dimensional finite elements
  proceeding
  
  Pagani, A.; Enea, M.; Carrera, E.
  In: Proceedings of the 16th U.S. National Congress on Computational Mechanics (USNCCM16)
  USNCCM
  16th U.S. National Congress on Computational Mechanics (USNCCM16) (Chicago, Illinois, USA) July 25-29, 2021
  pp.1
23. Advanced models for the analysis of variable stiffness composites with manufactured-induced gaps and overlaps
  proceeding
  
  Pagani, A.; Racionero Sanchez-Majano, A.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021)
  AIDAA
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021) (Pisa, Italy) August 31 - September 3, 2021
  pp.5
24. Stress analysis of variable angle tow shells by high-order unified finite elements
  proceeding
  
  Racionero Sanchez-Majano, A.; Azzara, R.; Pagani, A.; Carrera, E.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021)
  AIDAA
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021) (Pisa, Italy) August 31 - September 3, 2021
  pp.5
25. One-dimensional high order finite elements embedding 3D state-based peridynamic subdomains
  proceeding
  
  Enea, M.; Scabbia, F.; Pagani, A.; Zaccariotto, M.; Carrera, E.; Galvanetto, U.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021)
  AIDAA
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021) (Pisa, Italy) August 31 - September 3, 2021
  pp.6
26. Numerical nonlinear vibration-buckling investigation of variable stiffness composite plate and shell structures
  proceeding
  
  Azzara, R.; Carrera, E.; Pagani, A.; Racionero Sanchez-Majano, A.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021)
  AIDAA
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2021) (Pisa, Italy) August 31 - September 3, 2021
  pp.6
27. Three-dimensional stress and free vibration analysis of steel-concrete composite beams using high order theories and closed-form solutions
  proceeding
  
  Shen, J.; Pagani, A.; Arruda, M. R.
  In: Proceedings of the 7th International Conference on Mechanics of Composites (MECHCOMP7)
  MECHCOMP
  7th International Conference on Mechanics of Composites (MECHCOMP7) (Porto, Portugal) 1-3 September, 2021
28. Large deflection of composite beams by finite elements with node-dependent kinematics
  proceeding
  
  Pagani, A.; Augello, R.; Carrera, E.
  In: Proceedings of the 7th International Conference on Mechanics of Composites (MECHCOMP7)
  MECHCOMP
  7th International Conference on Mechanics of Composites (MECHCOMP7) (Porto, Portugal) 1-3 September, 2021
29. Homogenization and free-vibration analysis of elastic metamaterial plates by Carrera Unified Formulation finite elements
  articolo
  
  Cinefra, M.; de Miguel, A. G.; Filippi, M.; Houriet, C.; Pagani, A.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.28 pp.10 (pp.476-485) ISSN:1537-6494 DOI:10.1080/15376494.2019.1578005
30. Use of Lagrange polynomials to build refined theories for laminated beams, plates and shells
  articolo
  
  Pagani, A.; Carrera, E.; Augello, R.; Scano, D.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.276 pp.15 ISSN:0263-8223 DOI:10.1016/j.compstruct.2021.114505
31. Process induced deformations and residual stresses in curved composite parts: a parametric analysis
  proceeding
  
  Zappino, E.; Petrolo, M.; Zobeiry, N.; Carrera, E.
  In: VIII Conference on Mechanical Response of Composites
  M. Fagerstrom & G. Catalanotti
  8th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2021 (Gothenburg) 22-24 September
  pp.1 DOI:10.23967/composites.2021.092
32. Global-local progressive damage analysis of composite laminates using layer-wise higher-order structural models
  proceeding
  
  Nagaraj, M. H.; Carrera, E.; Petrolo, M.
  In: Proceedings of the American Society of Composites Thirty-Fifth Technical Conference
  DEStec Publications
  American Society of Composites Thirty-Fifth Technical Conference (Texas A&M University, College Station, Texas, USA) 20-22 Septmber 2021
  pp.9 (pp.1947-1955) ISBN:9781605956862
33. Representation, characterization and simulation of tool-part interaction and its effects on process-induced deformations in composites
  proceeding
  
  Schoenholz, C.; Slade, D; Zappino, E.; Petrolo, M.; Zobeiry, N.
  In: Proceedings of the American Society for Composites Thirty-Sixth Technical Conference
  DEStec Publications
  American Society of Composites Thirty-Fifth Technical Conference (Texas A&M University, College Station, Texas, USA) 20-22 Septmber 2021
  pp.13 (pp.1204-1216) ISBN:9781605956862
34. Efficient CUF-based method for the vibrations of thin-walled open cross-section beams under compression
  articolo
  
  Augello, R.; Daneshkhah, E.; Xu, X.; Carrera, E.
  JOURNAL OF SOUND AND VIBRATION
  Academic Press
  Vol.510 pp.19 ISSN:0022-460X DOI:10.1016/j.jsv.2021.116232
35. Benchmarks for higher-order modes evaluation in the free vibration response of open thin-walled beams due to the cross-sectional deformations
  articolo
  
  Xu, X.; Carrera, E.; Augello, R.; Daneshkhah, E.; Yang, H.
  THIN-WALLED STRUCTURES
  Elsevier Ltd
  Vol.166 pp.23 ISSN:0263-8231 DOI:10.1016/j.tws.2021.107965
36. A global–local approach for progressive damage analysis of fiber-reinforced composite laminates
  articolo
  
  Nagaraj, M. H.; Petrolo, M.; Carrera, E.
  THIN-WALLED STRUCTURES
  Elsevier
  Vol.169 pp.13 ISSN:0263-8231 DOI:10.1016/j.tws.2021.108343
37. A refined model for the prediction of process-induced deformations of composite structures
  proceeding
  
  Zappino, E.; Petrolo, M.; Zobeiry, N.; Carrera, E.
  In: Proceedings of the XXVI International Congress of the Italian Association of Aeronautics and Astronautics - AIDAA XXVI
  AIDAA
  XXVI International Congress of the Italian Association of Aeronautics and Astronautics - AIDAA XXVI (Virtual Congress) 31 August - 3 September 2021
  pp.4
38. Structural theories for random response of aerospace structures under stochastic loads
  proceeding
  
  Filippi, M.; Petrolo, M.; Carrera, E.
  In: Proceedings of the XXVI International Congress of the Italian Association of Aeronautics and Astronautics - AIDAA XXVI
  AIDAA
  XXVI International Congress of the Italian Association of Aeronautics and Astronautics - AIDAA XXVI (Virtual Congress) 31 August - 3 September 2021
  pp.4
39. Elastoplastic micromechanical analysis of fibre-reinforced composites with defects
  proceeding
  
  Nagaraj, M. H.; Kaleel, I.; Carrera, E.; Petrolo, M.
  In: Proceedings of the XXVI International Congress of the Italian Association of Aeronautics and Astronautics - AIDAA XXVI
  AIDAA
  XXVI International Congress of the Italian Association of Aeronautics and Astronautics - AIDAA XXVI (Virtual Congress) 31 August - 3 September 2021
  pp.7
40. Micromechanics Analysis of Composites via Carrera Unified Formulation and NASA Multiscale Analysis Tool
  proceeding
  
  Petrolo, M.; Carrera, E.; Kaleel, I.; Pineda, E. J.; Ricks, T. M.; Bednarcyk, B. A.; Arnold, S. M.
  In: Proceedings of the 25th International Congress of Theoretical and Applied Mechanics - XXV ICTAM
  IUTAM
  25th International Congress of Theoretical and Applied Mechanics - XXV ICTAM (Virtual Congress) 22-27 August 2021
  pp.2
41. On the effectiveness of composite layers reinforcements on the static behaviour of damaged civil structures through unified formulation
  proceeding
  
  Augello, R.; Xu, X.; Pagani, A.; Carrera, E.
  In: Book of Abstracts of the 24th International Conference on Composite Structures (ICCS24)
  ICCS24
  24th International Conference on Composite Structures (ICCS24) (Porto, Portugal) 14 - 18 June 2021
  pp.1
42. Advanced FEs for the analysis of composite structure with global/local and node-dependent kinematics approaches
  proceeding
  
  Augello, R.; Carrera, E.; Pagani, A.; Scano, D.
  In: Book of Abstracts of the 24th International Conference on Composite Structures (ICCS24)
  ICCS24
  24th International Conference on Composite Structures (ICCS24) (Porto, Portugal) 14 - 18 June 2021
43. CUF-BASED FINITE ELEMENTS FOR THE FREE-EDGE STRESS CONCENTRATION ANALYSIS OF COMPOSITE COUPONS AND STRUCTURES
  proceeding
  
  Pagani, Alfonso; Cavallo, Tommaso; Zappino, Enrico; Carrera, Erasmo
  In: Abstract Book of the 25th International Congress of Theoretical and Applied Mechanics (ICTAM)
  IUTAM
  25th International Congress of Theoretical and Applied Mechanics (ICTAM) August 22-27, 2021
  pp.2 (pp.1954-1955)
44. Effect of different geometrically nonlinear strain measures on the static nonlinear response of isotropic and composite shells with constant curvature
  articolo
  
  Pagani, A.; Azzara, R.; Wu, B.; Carrera, E.
  INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
  Elsevier Ltd
  Vol.209 pp.10 ISSN:0020-7403 DOI:10.1016/j.ijmecsci.2021.106713
45. Free vibration analysis of variable stiffness composite laminated beams and plates by novel hierarchical differential quadrature finite elements
  articolo
  
  Yan, Yang; Liu, Bo; Xing, Yufeng; Carrera, Erasmo; Pagani, Alfonso
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.274 pp.13 ISSN:0263-8223 DOI:10.1016/j.compstruct.2021.114364
46. CUF-based Multiscale Analysis of Failure of Composite Laminates
  proceeding
  
  Carrera, E.; Pagani, A.; Petrolo, M.
  In: Book of Abstracts of the 1st International Conference on Computations for Science and Engineering - ICCSE1
  António J.M. Ferreira, Nicholas Fantuzzi, Michele Bacciocchi
  1st International Conference on Computations for Science and Engineering - ICCSE1 (Virtual Conference) 19-22 July 2021
  pp.1
47. Geometrically nonlinear refined shell theories by Carrera Unified Formulation
  articolo
  
  Wu, B.; Pagani, A.; Chen, W. Q.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Inc.
  Vol.28 pp.21 (pp.1721-1741) ISSN:1537-6494 DOI:10.1080/15376494.2019.1702237
48. Reliability design optimisation of classic composite plates using a CUF-based layerwise approach
  proceeding
  
  Racionero Sanchez-Majano, Alberto; Pagani, Alfonso
  In: 24th International Conference on Composite Structures (ICCS24)
  Elsevier (PORTOGALLO)
  ICCS24 - 24th International Conference on Composite Structures (Porto (Portugal)) 14-18 June, 2021
  pp.1
49. Global-local plug-in for high-fidelity composite stress analysis in ABAQUS
  articolo
  
  Carrera, E.; de Miguel, A. G.; Filippi, M.; Kaleel, I.; Pagani, A.; Petrolo, M.; Zappino, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.28 pp.6 (pp.1445-1450) ISSN:1537-6494 DOI:10.1080/15376494.2019.1676938
50. Component-wise damage detection by neural networks and refined FEs training
  articolo
  
  Pagani, A.; Enea, M.; Carrera, E.
  JOURNAL OF SOUND AND VIBRATION
  Elsevier Ltd
  Vol.509 pp.16 ISSN:0022-460X DOI:10.1016/j.jsv.2021.116255
51. Post-buckling and Large-deflection analysis of a sandwich FG plate with FG porous core using Carrera’s Unified Formulation
  articolo
  
  Foroutan, K.; Carrera, E.; Pagani, A.; Ahmadi, H.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.272 pp.10 ISSN:0263-8223 DOI:10.1016/j.compstruct.2021.114189
52. Buckling Sensitivity of Tow-Steered Plates Subjected to Multiscale Defects by High-Order Finite Elements and Polynomial Chaos Expansion
  articolo
  
  Racionero Sanchez-Majano, A.; Pagani, A.; Petrolo, M.; Zhang, C.
  MATERIALS
  MDPI
  Vol.14 pp.28 ISSN:1996-1944
53. Global-local plug-in for high-fidelity composite stress analysis in Femap/NX Nastran
  articolo
  
  Carrera, E.; de Miguel, A. G.; Filippi, M.; Kaleel, I.; Pagani, A.; Petrolo, M.; Zappino, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.28 pp.7 (pp.1121-1127) ISSN:1537-6532 DOI:10.1080/15376494.2019.1655689
54. On the role of large cross-sectional deformations in the nonlinear analysis of composite thin-walled structures
  articolo
  
  Carrera, E.; Pagani, A.; Augello, R.
  ARCHIVE OF APPLIED MECHANICS
  Springer Science and Business Media Deutschland GmbH
  Vol.91 pp.17 (pp.1605-1621) ISSN:0939-1533 DOI:10.1007/s00419-020-01843-8
55. Buckling and post-buckling of anisotropic flat panels subjected to axial and shear in-plane loadings accounting for classical and refined structural and nonlinear theories
  articolo
  
  Carrera, E.; Azzara, R.; Daneshkhah, E.; Pagani, A.; Wu, B.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.133 pp.13 ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2021.103716
56. Compressive damage modeling of fiber-reinforced composite laminates using 2D higher-order layer-wise models
  articolo
  
  Nagaraj, M. H.; Reiner, J.; Vaziri, R.; Carrera, E.; Petrolo, M.
  COMPOSITES. PART B, ENGINEERING
  Elsevier
  Vol.215 pp.13 ISSN:1359-8368 DOI:10.1016/j.compositesb.2021.108753
57. Large deflection and post-buckling of thin-walled structures by finite elements with node-dependent kinematics
  articolo
  
  Carrera, E.; Pagani, A.; Augello, R.
  ACTA MECHANICA
  Springer
  Vol.232 pp.27 (pp.591-617) ISSN:0001-5970 DOI:10.1007/s00707-020-02857-7
58. Buckling performance of variable stiffness composites considering material uncertainties via multiscale stochastic fibre volumes
  proceeding
  
  Racionero Sanchez-Majano, A.; Pagani, A.
  In: 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures
  Elsevier
  2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (Porto (Portugal)) 5-7 March 2021
  pp.1
59. A critical assessment of design tools for stress analysis of adhesively bonded double lap joints
  articolo
  
  Stapleton, S. E.; Stier, B.; Jones, S.; Bergan, A.; Kaleel, I.; Petrolo, M.; Carrera, E.; Bednarcyk, B. A.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.28 pp.21 (pp.791-811) ISSN:1537-6494 DOI:10.1080/15376494.2019.1600768
60. Mixing layer-wise and refined equivalent-single layer FEs based on Lagrange expansions
  proceeding
  
  Augello, Riccardo; Carrera, Erasmo; Pagani, Alfonso; Scano, Daniele
  In: Titolo volume non avvalorato
  ICOMP
  2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (Online) 5-7 Marzo 2021
61. Static and dynamic testing of a full-composite VLA by using digital image correlation and output only ground vibration testing
  articolo
  
  Pagani, A.; Azzara, R.; Carrera, E.; Zappino, E.
  AEROSPACE SCIENCE AND TECHNOLOGY
  Elsevier Ltd
  Vol.112 pp.15 ISSN:1270-9638 DOI:10.1016/j.ast.2021.106632
62. Who needs refined structural theories?
  articolo
  
  Carrera, E.; Elishakoff, I.; Petrolo, M.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.264 pp.16 ISSN:0263-8223 DOI:10.1016/j.compstruct.2021.113671
63. Advanced FEs for the micropolar and geometrical nonlinear analyses of composite structures
  tesi dottorato
  
  Augello, Riccardo
  Politecnico di Torino
  pp.210 (pp.1-210)
64. Higher-order layer-wise models for the progressive damage and impact analysis of composite structures
  tesi dottorato
  
  Nagaraj, MANISH HASSAN
  Politecnico di Torino
  pp.150 (pp.1-150)
65. Validation of FEM models based on Carrera Unified Formulation for the parametric characterization of composite metamaterials
  articolo
  
  De Miguel, A. G.; Cinefra, M.; Filippi, M.; Pagani, A.; Carrera, E.
  JOURNAL OF SOUND AND VIBRATION
  Elsevier Ltd
  Vol.498 pp.17 ISSN:0022-460X DOI:10.1016/j.jsv.2021.115979
66. Multiscale Analysis of Fibre-Reinforced Composites via a Component-Wise Approach
  proceeding
  
  Nagaraj, M. H.; Carrera, E.; Petrolo, M.
  In: Proceedings of the 14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020
  WCCM
  14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020 (Virtual Congress) 11-15 January 2021
67. Selection of element-wise shell kinematics using neural networks
  articolo
  
  Petrolo, M.; Carrera, E.
  COMPUTERS & STRUCTURES
  Elsevier
  Vol.244 pp.13 ISSN:0045-7949 DOI:10.1016/j.compstruc.2020.106425
68. Nonlinear analysis of thin-walled beams with highly deformable sections
  articolo
  
  Carrera, E.; Pagani, A.; Giusa, D.; Augello, R.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.128 pp.13 (pp.1-13) ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2020.103613
69. The generation and validation of a CUF-based FEA model with laser-based experiments
  articolo
  
  Xu, X.; Augello, R.; Yang, H.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.28 pp.8 (pp.1648-1655) ISSN:1537-6494 DOI:10.1080/15376494.2019.1697473
70. Optimized free-form surface modeling of point clouds from laser-based measurement
  articolo
  
  Xu, X.; Yang, H.; Augello, R.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.28 pp.9 (pp.1570-1578) ISSN:1537-6494 DOI:10.1080/15376494.2019.1688435
2020
1. Flutter analysis of laminated composite structures using Carrera Unified Formulation
  articolo
  
  Bharati, Rb; Filippi, M; Mahato, Pk; Carrera, E
  COMPOSITE STRUCTURES
  ELSEVIER SCI LTD
  Vol.253 pp.7 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112759
2. High-order finite beam elements for propagation analyses of arbitrary-shaped one-dimensional waveguides
  articolo
  
  Filippi, M.; Pagani, A.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.29 pp.9 (pp.1883-1891) ISSN:1537-6494 DOI:10.1080/15376494.2020.1842951
3. Experimental and numerical vibration correlation of pre-stressed laminated reinforced panel
  articolo
  
  H. Cabral, P.; Carrera, E.; dos Santos, H. E. A. A.; Galeb, P. H. G.; Pagani, A.; Peeters, D.; Prado, A. P.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  pp.12 ISSN:1537-6494 DOI:10.1080/15376494.2020.1853285
4. Advanced simulation and testing of composite TRAC longerons
  proceeding
  
  Pagani, A.; Carrera, E.; Hasanyan, A.; Pellegrino, S.
  In: Proceedings of the 71st International Astronautical Congress (IAC)
  International Astronautical Federation (IAF)
  71st International Astronautical Congress (IAC) (The CyberSpace Edition) 12-14 October 2020
  pp.5
5. Evaluation of the bending response of compact and thin-walled FG beams with CUF
  articolo
  
  Demirbas, M. D.; Caliskan, U.; Xu, X.; Filippi, M.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Inc.
  pp.10 (pp.1-10) ISSN:1537-6494 DOI:10.1080/15376494.2019.1704951
6. Layerwise mixed elements with node-dependent kinematics for global–local stress analysis of multilayered plates using high-order Legendre expansions
  articolo
  
  Moleiro, F.; Carrera, E.; Zappino, E.; Li, G.; Cinefra, M.
  COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
  Elsevier B.V.
  Vol.359 pp.27 ISSN:0045-7825 DOI:10.1016/j.cma.2019.112764
7. Advanced modeling of embedded piezo-electric transducers for the health-monitoring of layered structures
  articolo
  
  Zappino, E.; Carrera, E.
  INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS
  Taylor and Francis Ltd.
  Vol.11 pp.18 (pp.325-342) ISSN:1947-5411 DOI:10.1080/19475411.2020.1841038
8. Effective static and dynamic finite element modeling of a double swept composite rotor blade
  articolo
  
  Filippi, M.; Zappino, E.; Carrera, E.; Castanie, B.
  JOURNAL OF THE AMERICAN HELICOPTER SOCIETY
  American Helicopter Society
  Vol.65 pp.12 (pp.1-12) ISSN:0002-8711 DOI:10.4050/JAHS.65.032003
9. Sensitivity analysis of variable stiffness composite plates by CUF-based layerwise models
  proceeding
  
  Racionero Sanchez-Majano, A.; Pagani, A.; Carrera, E.
  In: 14th WCCM & ECCOMAS Congress 2020
  CINME (SPAGNA)
  14th WCCM & ECCOMAS Congress 2020 (Paris (France)) 11-15 January, 2021
  pp.2 (pp.2841-2842) ISBN:9788412110173
10. Time Response Stress Analysis of Solid and Reinforced Thin-Walled Structures by Component-Wise Models
  articolo
  
  Azzara, R.; Carrera, E.; Filippi, M.; Pagani, A.
  INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY & DYNAMICS
  World Scientific
  Vol.20 pp.26 ISSN:0219-4554 DOI:10.1142/S0219455420430105
11. Coupled thermo-mechanical finite element models with node-dependent kinematics for multi-layered shell structures
  articolo
  
  Li, G.; Cinefra, M.; Carrera, E.
  INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
  Elsevier
  Vol.171 pp.9 (pp.1-9) ISSN:0020-7403 DOI:10.1016/j.ijmecsci.2019.105379
12. Stochastic stress analysis and failure onset of variable angle tow laminates affected by spatial fibre variations
  articolo
  
  Pagani, Alfonso; RACIONERO SANCHEZ-MAJANO, Alberto
  COMPOSITES. PART C, OPEN ACCESS
  Elsevier
  Vol.4 pp.12 ISSN:2666-6820 DOI:10.1016/j.jcomc.2020.100091
13. Experimental and numerical analysis of 3D printed open-hole plates reinforced with carbon fibers
  articolo
  
  Zappino, E.; Filippi, M.; Pagani, A.; Petiti, M.; Carrera, E.
  COMPOSITES. PART C, OPEN ACCESS
  Elsevier Ltd
  Vol.2 pp.12 ISSN:2666-6820 DOI:10.1016/j.jcomc.2020.100007
14. Application of Genetic Algorithm Optimization in Analysis of Variable Stiffness Composites
  proceeding
  
  Fallahi, Nasim; Carrera, Erasmo; Pagani, Alfonso
  In: Title of the volume not validated
  World Academy of Science, Engineering and Technology
  ICCMP 2020 : 22nd International Conference on Composite Materials and Polymers (Rome, Italy) 22nd
15. Coupling three-dimensional peridynamics and high-order one-dimensional finite elements based on local elasticity for the linear static analysis of solid beams and thin-walled reinforced structures
  articolo
  
  Pagani, A.; Carrera, E.
  INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
  John Wiley and Sons Ltd
  Vol.121 pp.16 (pp.5066-5081) ISSN:0029-5981 DOI:10.1002/nme.6510
16. Vibration of metallic and composite shells in geometrical nonlinear equilibrium states
  articolo
  
  Carrera, E.; Pagani, A.; Azzara, R.; Augello, R.
  THIN-WALLED STRUCTURES
  Elsevier Ltd
  Vol.157 pp.13 ISSN:0263-8231 DOI:10.1016/j.tws.2020.107131
17. Accurate through-the-thickness stress distributions in thin-walled metallic structures subjected to large displacements and large rotations
  articolo
  
  Pagani, A.; Azzara, R.; Augello, R.; Carrera, E.; Wu, B.
  VIETNAM JOURNAL OF MECHANICS
  Vietnam Academy of Science and Technology
  Vol.42 pp.16 (pp.239-254) ISSN:0866-7136 DOI:10.15625/0866-7136/15042
18. A Multiscale Framework for the Progressive Damage Analysis of Fiber-Reinforced Composites Using a Component-Wise Approach
  proceeding
  
  Nagaraj, M. H.; Carrera, E.; Petrolo, M.
  In: Proceedings of the American Society of Composites Thirty-Fifth Technical Conference
  Kishore Pochiraju, Nikhil Gupta (STATI UNITI D'AMERICA)
  Thirty-Fifth Technical Conference of the American Society of Composites (Virtual Conference) 14-17 September 2020
  pp.13 (pp.1440-1452) ISBN:9781605956657
19. Evaluation of the influence of voids on 3D representative volume elements of fiber-reinforced polymer composites using CUF micromechanics
  articolo
  
  Carrera, E.; Petrolo, M.; Nagaraj, M. H.; Delicata, M.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.254 pp.15 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112833
20. Progressive damage analysis of composite laminates subjected to low-velocity impact using 2D layer-wise structural models
  articolo
  
  Nagaraj, M. H.; Carrera, E.; Petrolo, M.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier
  Vol.127 pp.9 ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2020.103591
21. Best Spatial Distributions of Shell Kinematics Over 2D Meshes for Free Vibration Analyses
  articolo
  
  Petrolo, M.; Carrera, E.
  AEROTECNICA MISSILI & SPAZIO
  Springer
  Vol.99 pp.16 (pp.217-232) ISSN:2524-6968 DOI:10.1007/s42496-020-00045-3
22. Numerical analysis of disbonding in sandwich structures using 1D finite elements
  articolo
  
  Qi, L.; Nagaraj, M. H.; Carrera, E.; Gao, G. F.; Petrolo, M.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.252 pp.8 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112717
23. EFFECT OF FIBER ORIENTATION PATH ON THE BUCKLING, FREE VIBRATION, AND STATIC ANALYSES OF VARIABLE ANGLE TOW PANELS
  articolo
  
  Fallahi, Nasim; Viglietti, Andrea; Carrera, Erasmo; Pagani, Alfonso; Zappino, Enrico
  FACTA UNIVERSITATIS. SERIES: MECHANICAL ENGINEERING
  University of Niš
  Vol.18 pp.24 (pp.165-188) ISSN:0354-2025 DOI:10.22190/FUME200615026F
24. Strong and weak form solutions of curved beams via Carrera’s unified formulation
  articolo
  
  De Pietro, Gabriele; de Miguel, Alberto Garcia; Carrera, E.; Giunta, Gaetano; Belouettar, Salim; Pagani, Alfonso
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Inc.
  Vol.27 pp.12 (pp.1342-1353) ISSN:1537-6494 DOI:10.1080/15376494.2018.1510066
25. Assessment of classical, advanced, and layer-wise theories for the vibration of rotating composite anisotropic blades
  articolo
  
  Filippi, M.; Giusa, D.; Pagani, A.; Zappino, E.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.245 pp.12 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112315
26. On the use of neural networks to evaluate performances of shell models for composites
  articolo
  
  Petrolo, M.; Carrera, E.
  ADVANCED MODELING AND SIMULATION IN ENGINEERING SCIENCES
  Springer
  Vol.7 pp.28 ISSN:2213-7467 DOI:10.1186/s40323-020-00169-y
27. Multibody simulation and descent control of a space lander
  articolo
  
  Pagani, A; Azzara, R; Augello, R; Carrera, E
  ADVANCES IN AIRCRAFT AND SPACECRAFT SCIENCE
  TECHNO-PRESS
  Vol.7 pp.23 (pp.91-113) ISSN:2287-528X DOI:10.12989/aas.2020.7.2.091
28. Popular benchmarks of nonlinear shell analysis solved by 1D and 2D CUF-based finite elements
  articolo
  
  Carrera, E.; Pagani, A.; Augello, R.; Wu, B.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Inc.
  Vol.27 pp.12 (pp.1098-1109) ISSN:1537-6494 DOI:10.1080/15376494.2020.1728450
29. Evaluation of stress distributions in the geometrical nonlinear regime of functionally graded structures
  articolo
  
  Demirbas, M. D.; Xu, X.; Carrera, E.; Yang, H.; Augello, R.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.246 pp.20 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112385
30. Effect of large displacements on the linearized vibration of composite beams
  articolo
  
  Carrera, E.; Pagani, A.; Augello, R.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.120 pp.13 ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2019.103390
31. Accurate evaluation of 3D stress fields in adhesive bonded joints via higher-order FE models
  articolo
  
  de Miguel, A. G.; Pagani, A.; Rizzo, L.; Catapano, A.; Panettieri, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Inc.
  Vol.27 pp.13 (pp.333-345) ISSN:1537-6494 DOI:10.1080/15376494.2018.1472352
32. Efficient numerical evaluation of transmission loss in homogenized acoustic metamaterials for aeronautical application
  articolo
  
  Cinefra, M.; D'Amico, G.; De Miguel, A. G.; Filippi, M.; Pagani, A.; Carrera, E.
  APPLIED ACOUSTICS
  Elsevier Ltd
  Vol.164 pp.13 ISSN:0003-682X DOI:10.1016/j.apacoust.2020.107253
33. Evaluation of geometrically nonlinear terms in the large-deflection and post-buckling analysis of isotropic rectangular plates
  articolo
  
  Pagani, A.; Daneshkhah, E.; Xu, X.; Carrera, E.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.121 pp.11 ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2020.103461
34. A variable kinematic one-dimensional model for the hygro-mechanical analysis of composite materials
  articolo
  
  Severino, S.; Zappino, E.; Pagani, A.; Gigliotti, M.; Pannier, Y.; Carrera, E.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.242 pp.13 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112089
35. Progressive damage analysis of composite structures using higher-order layer-wise elements
  articolo
  
  Nagaraj, M. H.; Reiner, J.; Vaziri, R.; Carrera, E.; Petrolo, M.
  COMPOSITES. PART B, ENGINEERING
  Elsevier
  Vol.190 pp.11 ISSN:1359-8368 DOI:10.1016/j.compositesb.2020.107921
36. Analysis of process-induced deformations and residual stresses in curved composite parts considering transverse shear stress and thickness stretching
  articolo
  
  Zappino, E.; Zobeiry, N.; Petrolo, M.; Vaziri, R.; Carrera, E.; Poursartip, A.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.241 pp.15 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112057
37. On the effects of trigonometric and exponential terms on the best theory diagrams for metallic, multilayered, and functionally graded plates
  articolo
  
  Mantari, J. L.; Yarasca, J.; Petrolo, M.; Carrera, E.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis
  Vol.27 pp.15 (pp.426-440) ISSN:1537-6532 DOI:10.1080/15376494.2018.1478048
38. Methods and guidelines for the choice of shell theories
  articolo
  
  Petrolo, M.; Carrera, E.
  ACTA MECHANICA
  Springer-Verlag GmbH Austria, part of Springer Nature 2020
  Vol.231 pp.40 (pp.395-434) ISSN:0001-5970 DOI:10.1007/s00707-019-02601-w
39. Contact analysis of laminated structures including transverse shear and stretching
  articolo
  
  Nagaraj, M. H.; Kaleel, I.; Carrera, E.; Petrolo, M.
  EUROPEAN JOURNAL OF MECHANICS. A, SOLIDS
  Elsevier
  Vol.80 pp.9 ISSN:0997-7538 DOI:10.1016/j.euromechsol.2019.103899
40. Isogeometric analysis of 3D straight beam-type structures by Carrera Unified Formulation
  articolo
  
  Yan, Y.; Carrera, E.; Pagani, A.; Kaleel, I.; de Miguel, A. G.
  APPLIED MATHEMATICAL MODELLING
  Elsevier
  Vol.79 pp.25 (pp.768-792) ISSN:0307-904X DOI:10.1016/j.apm.2019.11.003
41. Computationally-Efficient Structural Models for Analysis of Woven Composites
  proceeding
  
  Kaleel, I.; de Miguel, A. G.; Petrolo, M.; Pagani, A.; Carrera, E.; Ricks, T. M.; Pineda, E. J.; Bednarcyk, B. A.; Arnold, S. M.
  In: Proceedings of the AIAA Scitech 2020 Forum
  AIAA (STATI UNITI D'AMERICA)
  AIAA Scitech 2020 Forum (Orlando, FL, USA) 6-10 January 2020
  pp.8 DOI:10.2514/6.2020-2110
42. Progressive delamination of laminated composites via 1D models
  articolo
  
  Kaleel, I.; Carrera, E.; Petrolo, M.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.235 pp.10 ISSN:0263-8223 DOI:10.1016/j.compstruct.2019.111799
43. Nonlinear analysis of compact and thin-walled metallic structures including localized plasticity under contact conditions
  articolo
  
  Nagaraj, M. H.; Kaleel, I.; Carrera, E.; Petrolo, M.
  ENGINEERING STRUCTURES
  Elsevier
  Vol.203 pp.10 ISSN:0141-0296 DOI:10.1016/j.engstruct.2019.109819
2019
1. Comparison of classical and refined beam models applied on isotropic and FG thin-walled beams in nonlinear buckling response
  articolo
  
  Kvaternik, S; Filippi, M; Lanc, D; Turkalj, G; Carrera, E
  COMPOSITE STRUCTURES
  ELSEVIER SCI LTD
  Vol.229 pp.7 ISSN:0263-8223 DOI:10.1016/j.compstruct.2019.111490
2. Multidimensional models for double-swept helicopter blades
  articolo
  
  Filippi, M.; Zappino, E.; Carrera, E.
  AIAA JOURNAL
  American Institute of Aeronautics and Astronautics Inc.
  Vol.57 pp.8 (pp.2609-2616) ISSN:0001-1452 DOI:10.2514/1.J058032
3. Variable Kinematic Shell Formulations Accounting for Multi-field Effects for the Analysis of Multi-layered Structures
  capitolo
  
  Li, G.; Carrera, E.; Cinefra, M.; Zappino, E.; Jansen, E.
  Advances in Predictive Models and Methodologies for Numerically Efficient Linear and Nonlinear Analysis of Composites
  Springer
  pp.15 (pp.13-27) ISBN:9783030119683 DOI:10.1007/978-3-030-11969-0_2
4. Multi-dimensional models for the global-local analysis of smart layered structures
  proceeding
  
  Zappino, E.; Carrera, E.
  In: 9th ECCOMAS Thematic Conference on Smart Structures and Materials, SMART 2019
  International Center for Numerical Methods in Engineering
  9th ECCOMAS Thematic Conference on Smart Structures and Materials, SMART 2019 (Paris, France) 8-11 July
  pp.8 (pp.610-617)
5. Free vibration analysis of variable angle-tow composite wing structures
  articolo
  
  Viglietti, A.; Zappino, E.; Carrera, E.
  AEROSPACE SCIENCE AND TECHNOLOGY
  Elsevier Masson SAS
  Vol.92 pp.12 (pp.114-125) ISSN:1270-9638 DOI:10.1016/j.ast.2019.05.068
6. Micropolar elasticity by unified theory
  proceeding
  
  Augello, Riccardo; Pagani, Alfonso; Carrera, Erasmo
  In: The 23rd Annual Conference of HKSTAM 2019
  HKUST
  The 15th Jiangsu – Hong Kong Forum on Mechanics and Its Application (Hong Kong) 13 Aprile 2019
7. Evaluation of Various Geometrical Nonlinearities in the Response of Beams and Shells
  articolo
  
  Pagani, A.; Carrera, E.; Augello, R.
  AIAA JOURNAL
  American Institute of Aeronautics and Astronautics
  Vol.57 pp.10 (pp.3524-3533) ISSN:0001-1452 DOI:10.2514/1.J057877
8. The MAMS J.N. Reddy Medal at the 1st and 2nd ICMAMS
  editoriale
  
  Carrera, E.; Petrolo, M.; Li, G.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor & Francis
  Vol.26 pp.2 (pp.1995-1996) ISSN:1537-6494 DOI:10.1080/15376494.2019.1622893
9. Development of reduced structural theories for composite plates and shells via machine learning
  proceeding
  
  Petrolo, M.; Carrera, E.; Filippi, M.
  In: Proceedings of the MORTech 2019 - 5th international Workshop on Reduced Basis, POD and PGD Model Reduction Techniques
  P. Ladeveze
  MORTech 2019 - 5th international Workshop on Reduced Basis, POD and PGD Model Reduction Techniques (Paris) 20-22 November 2019
  pp.2
10. High-fidelity impact analysis of composite structures using refined structural theories
  proceeding
  
  Nagaraj, M. H.; Carrera, E.; Petrolo, M.
  In: Proceedings of the First European Conference on Crashworthiness of Composite Structures – ECCCS-1
  Brian Falzon
  First European Conference on Crashworthiness of Composite Structures – ECCCS-1 (Belfast, UK) 19-21 November 2019
  pp.1
11. Computationally efficient thermo-mechanical analysis for predicting process-induced deformations of composite structures
  proceeding
  
  Zappino, E.; Zobeiry, N.; Petrolo, M.; Vaziri, R.; Carrera, E.; Poursartip, A.
  In: Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition IMECE2019
  ASME
  ASME 2019 International Mechanical Engineering Congress and Exposition IMECE2019 (Salt Lake City, UT, USA) November 11-14, 2019
  pp.6
12. Best structural theories for free vibrations of sandwich composites via machine learning
  proceeding
  
  Petrolo, M.; Carrera, E.
  In: Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition IMECE2019
  ASME
  ASME 2019 International Mechanical Engineering Congress and Exposition IMECE2019 (Salt Lake City, UT, USA) November 11-14, 2019
  pp.12
13. Large-deflection and post-buckling analyses of isotropic rectangular plates by Carrera Unified Formulation
  proceeding
  
  Wu, B.; Pagani, A.; Carrera, E.
  In: Proceedings of the International Conference on Nonlinear Solid Mechanics (IConSoM)
  M. Amabili
  International Conference on Nonlinear Solid Mechanics (IConSoM) (Rome, Italy) 16-19 June, 2019
14. Nonlinear dynamics of composite blades
  proceeding
  
  Filippi, M.; Pagani, A.; Carrera, E.
  In: Proceedings of the 5th International Conference on Mechanics of Composites (MECHCOMP)
  A.J.M. Ferreira
  5th International Conference on Mechanics of Composites (MECHCOMP) (Lisboa, Portugal) 1-4 July, 2019
15. Interlaminar stresses in composite booms subjected to large deflections
  proceeding
  
  Pagani, A.; Wu, B.; de Miguel, A. G.; Carrera, E.; Chen, W.
  In: Proceedings of the 5th International Conference on Mechanics of Composites (MECHCOMP)
  A.J.M. Ferreira
  5th International Conference on Mechanics of Composites (MECHCOMP) (Lisboa, Portugal) 1-4 July, 2019
16. Vibration around non-trivial equilibrium of highly flexible composite thin-walled structures and plates
  proceeding
  
  Pagani, Alfonso; Carrera, Erasmo; Filippi, Matteo; Wu, Bin
  In: Proceedings of the 12th International Symposium on Vibrations of Continuous Systems (ISVCS12)
  ISVCS
  12th International Symposium on Vibrations of Continuous Systems (ISVCS12) (Corvara in Badia, Italy) July 28 - August 2, 2019
  pp.3
17. Global/local sensitivity analysis and design optimization of aerospace composite laminates
  proceeding
  
  Pagani, A.; de Miguel, A. G.; Lionetti, M. P.; Racionero Sanchez-Majano, A.; Carrera, E.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019)
  Associazione Italiana di Aeronautica e Astronautica
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019) (Rome, Italy) 9-12 September, 2019
  pp.1
18. Design optimization of a VLA composite wing
  proceeding
  
  Lionetti, MARIA PIA; Pagani, A.; Carrera, E.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019)
  Associazione Italiana di Aeronautica e Astronautica
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019) (Rome, Italy) 9-12 September, 2019
  pp.1
19. Static and dynamic experimental analysis of a full composite VLA aircraft
  proceeding
  
  Pagani, A.; Carrera, E.; Zappino, E.; Azzara, Rodolfo; de Miguel, A. G.; Lionetti, M. P.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019)
  Associazione Italiana di Aeronautica e Astronautica
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019) (Rome, Italy) 9-12 September, 2019
  pp.1
20. Simulation and testing of 3D printed carbon fibre reinforced aeronautical components
  proceeding
  
  Zappino, E.; Pagani, A.; Petiti, M.; Micali, L.; Filippi, M.; Carrera, E.
  In: Proceedings of the Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019)
  Associazione Italiana di Aeronautica e Astronautica
  Italian Association of Aeronautics and Astronautics - XXV International Conference (AIDAA 2019) (Rome, Italy) 9-12 September, 2019
  pp.1
21. Efficient analysis of geometrically nonlinear deployable thin shell structures using Carrera unified formulation
  proceeding
  
  Pagani, Alfonso; Carrera, Erasmo; de Miguel, Alberto G.; Hasanyan, Armanj; Pellegrino, Sergio; Reddy, Narravula H.; Zappino, Enrico
  In: Proceedings of the 70th International Astronautical Congress (IAC)
  International Astronautical Federation (IAF)
  70th International Astronautical Congress (IAC) (Washington, D.C.) 21-25 October 2019
  pp.4
22. Geometrical nonlinear analysis of shells by Carrera Unified Formulation
  proceeding
  
  Wu, B.; Pagani, A.; Chen, W. Q.; Carrera, E.
  In: Proceedings of the Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019
  International Conference of Mechanics of Advanced Materials and Structures
  Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019 (Nanjing, China) 19-22 October 2019
  pp.2
23. Effect of structural modelling approximations on minimum weight design optimization of composite laminates
  proceeding
  
  Pagani, A.; Racionero Sanchez-Majano, A.; Petrolo, M.
  In: Proceedings of the Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019
  International Conference of Mechanics of Advanced Materials and Structures
  Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019 (Nanjing, China) 19-22 October 2019
  pp.1
24. Large-deformation analysis of isotropic elastomeric structures by Carrera Unified Formulation
  proceeding
  
  Wu, B.; Pagani, A.; Chen, W. Q.; Carrera, E.
  In: Proceedings of the Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019
  International Conference of Mechanics of Advanced Materials and Structures
  Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019 (Nanjing, China) 19-22 October 2019
  pp.1
25. Unified theory of structures based on micropolar elasticity
  articolo
  
  Augello, R.; Carrera, E.; Pagani, A.
  MECCANICA
  Springer Netherlands
  Vol.54 pp.16 (pp.1785-1800) ISSN:0025-6455 DOI:10.1007/s11012-019-01041-z
26. Three-dimensional solutions for rotor blades using high-order geometrical nonlinear beam finite elements
  articolo
  
  Filippi, M.; Pagani, A.; Carrera, E.
  JOURNAL OF THE AMERICAN HELICOPTER SOCIETY
  American Helicopter Society
  Vol.64 pp.10 (pp.1-10) ISSN:0002-8711 DOI:10.4050/JAHS.64.032005
27. Evaluation of shear and membrane locking in refined hierarchical shell finite elements for laminated structures
  articolo
  
  Li, G.; Carrera, E.; Cinefra, M.; de Miguel, A. G.; Kulikov, G. M.; Pagani, A.; Zappino, E.
  ADVANCED MODELING AND SIMULATION IN ENGINEERING SCIENCES
  Springer
  Vol.6 pp.24 (pp.1-24) ISSN:2213-7467 DOI:10.1186/s40323-019-0131-1
28. Assessments on stress evaluations in compact, thin-walled, FGM and laminated beams
  proceeding
  
  Demirbas, M. D.; Carrera, E.; Petrolo, M.
  In: Proceedings of the Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019
  Erasmo Carrera, Weiqiu Chen, Cun-Fa Gao, J.N. Reddy
  Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019 (Nanjing, China) 19-22 October 2019
  pp.1 DOI:10.5281/zenodo.3516599
29. Evaluation of shell theory performances via neural networks
  proceeding
  
  Petrolo, M.
  In: Proceedings of the Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019
  Erasmo Carrera, Weiqiu Chen, Cun-Fa Gao, J.N. Reddy
  Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019 (Nanjing, China) 19-22 October 2019
  pp.2 DOI:10.5281/zenodo.3516599
30. Integration of CUF Micromechanics Framework into NASMAT for Multiscale Analysis of Fiber-Reinforced Composites
  proceeding
  
  Kaleel, I.; Petrolo, M.; Carrera, E.; Pineda, E. J.; Ricks, T. M.; Bednarcyk, B. A.; Arnold, and S. M.
  In: Proceedings of the Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019
  Erasmo Carrera, Weiqiu Chen, Cun-Fa Gao, J.N. Reddy
  Second International Conference on Mechanics of Advanced Materials and Structures - ICMAMS 2019 (Nanjing, China) 19-22 October 2019
  pp.2 DOI:10.5281/zenodo.3516599
31. HIGH-FIDELITY DAMAGE ANALYSIS OF COMPOSITES USING A PLY-BASED CONTINUUM MODEL
  proceeding
  
  Nagaraj, M. H.; Reiner, J.; Vaziri, R.; Carrera, E.; Petrolo, M.
  In: Proceedings of the XXV International Congress of Aeronautics and Astronautics, AIDAA 2019
  AIDAA
  XXV International Congress of Aeronautics and Astronautics, AIDAA 2019 (Rome) 9-12 September 2019
  pp.9 (pp.1113-1121) ISBN:9788894396010
32. CONTACT MODELLING OF COMPOSITE STRUCTURES USING ADVANCED STRUCTURAL THEORIES
  proceeding
  
  Nagaraj, M. H.; Kaleel, I.; Carrera, E.; Petrolo, M.
  In: Proceedings of the XXV International Congress of Aeronautics and Astronautics, AIDAA 2019
  AIDAA
  XXV International Congress of Aeronautics and Astronautics, AIDAA 2019 (Rome) 9-12 September 2019
  pp.9 (pp.1104-1112) ISBN:9788894396010
33. Computationally Efficient Concurrent Multiscale Framework for the Nonlinear Analysis of Composite Structures
  articolo
  
  Kaleel, I.; Petrolo, M.; Carrera, E.; Waas, A. M.
  AIAA JOURNAL
  AIAA
  Vol.57 pp.13 (pp.4029-4041) ISSN:0001-1452 DOI:10.2514/1.J057881
34. Computationally Efficient Concurrent Multiscale Framework for the Linear Analysis of Composite Structures
  articolo
  
  Kaleel, I.; Petrolo, M.; Carrera, E.; Waas, A. M.
  AIAA JOURNAL
  AIAA
  Vol.57 pp.10 (pp.4019-4028) ISSN:0001-1452 DOI:10.2514/1.J057880
35. Preliminary Assessments on the Development of Refined Shell Models for Free Vibrations via Machine Learning
  proceeding
  
  Carrera, E.; Petrolo, M.
  In: Proceedings of the 12th International Symposium on Vibrations of Continuous Systems
  E. Carrera
  12th International Symposium on Vibrations of Continuous Systems, ISVCS (Corvara in Badia, Italy) 28 July - 2 August 2019
  pp.3
36. Higher-order structural theories for transient analysis of multi-mode Lamb waves with applications to damage detection
  articolo
  
  de Miguel, A. G.; Pagani, A.; Carrera, E.
  JOURNAL OF SOUND AND VIBRATION
  Elsevier
  Vol.457 pp.17 (pp.139-155) ISSN:0022-460X DOI:10.1016/j.jsv.2019.05.053
37. Large-deflection and post-buckling analyses of isotropic rectangular plates by Carrera Unified Formulation
  articolo
  
  Wu, B.; Pagani, A.; Filippi, M.; Chen, W. Q.; Carrera, E.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.116 pp.14 (pp.18-31) ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2019.05.004
38. Analysis of variable angle tow composites structures using variable kinematic models
  articolo
  
  Viglietti, A.; Zappino, E.; Carrera, E.
  COMPOSITES. PART B, ENGINEERING
  Elsevier
  Vol.171 pp.12 (pp.272-283) ISSN:1359-8368 DOI:10.1016/j.compositesb.2019.03.072
39. Free-edge stress fields in generic laminated composites via higher-order kinematics
  articolo
  
  de Miguel, A. G.; Pagani, A.; Carrera, E.
  COMPOSITES. PART B, ENGINEERING
  Elsevier Ltd
  Vol.168 pp.12 (pp.375-386) ISSN:1359-8368 DOI:10.1016/j.compositesb.2019.03.047
40. A global/local approach based on CUF for the accurate and efficient analysis of metallic and composite structures
  articolo
  
  Carrera, E.; Fiordilino, G. A.; Nagaraj, M.; Pagani, A.; Montemurro, M.
  ENGINEERING STRUCTURES
  Elsevier Ltd
  Vol.188 pp.14 (pp.188-201) ISSN:0141-0296 DOI:10.1016/j.engstruct.2019.03.016
41. High-fidelity vibration analysis of tapered swept tailored composite wing boxes
  articolo
  
  Viglietti, Andrea; Zappino, Enrico; Carrera, Erasmo
  JOURNAL OF AIRCRAFT
  American Institute of Aeronautics and Astronautics Inc.
  Vol.56 pp.5 (pp.842-846) ISSN:0021-8669 DOI:10.2514/1.C034795
42. Best theory diagrams for multilayered structures via shell finite elements
  articolo
  
  Petrolo, M.; Carrera, E.
  ADVANCED MODELING AND SIMULATION IN ENGINEERING SCIENCES
  P. Ladevèze/Springer
  Vol.6 pp.23 (pp.1-23) ISSN:2213-7467 DOI:10.1186/s40323-019-0129-8
43. Accurate stress fields of post-buckled laminated composite beams accounting for various kinematics
  articolo
  
  Wu, Bin; Pagani, A.; Filippi, M.; Chen, W. Q.; Carrera, E.
  INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
  Elsevier Ltd
  Vol.111 pp.12 (pp.60-71) ISSN:0020-7462 DOI:10.1016/j.ijnonlinmec.2019.02.002
44. MITC9 Shell elements based on RMVT and CUF for the analysis of laminated composite plates and shells
  articolo
  
  Cinefra, Maria; Kumar, S. Keshava; Carrera, Erasmo
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.209 pp.8 (pp.383-390) ISSN:0263-8223 DOI:10.1016/j.compstruct.2018.10.039
45. Multi-scale Modelling and Design of Composite Structures
  tesi dottorato
  
  Hui, Yanchuan; Giunta, Gaetano; Belouettar, Salim; Carrera, Erasmo; Hu, Heng
  pp.121
46. Computationally-efficient multiscale models for progressive failure and damage analysis of composites
  tesi dottorato
  
  Kaleel, Ibrahim; Carrera, Erasmo; Petrolo, Marco; Waas, Anthony M
  pp.210
47. Effect of in-plane loadings on the free vibration of plates in nonlinear regime
  proceeding
  
  Augello, R.; Carrera, E.; Chen, W.; Filippi, M.; Pagani, A.; Wu, B.
  In: Proceedings of the First International Nonlinear Dynamics Conference
  Sapienza Università di Roma
  First International Nonlinear Dynamics Conference (NODYCON 2019) (Rome, Italy) February 17-20, 2019
  pp.2
48. Full field strain measurements of composite wing by digital image correlation
  articolo
  
  Pagani, A.; Zappino, E.; de Miguel, A. G.; Martilla, V.; Carrera, E.
  ADVANCES IN AIRCRAFT AND SPACECRAFT SCIENCE
  Techno Press
  Vol.6 pp.18 (pp.69-86) ISSN:2287-528X DOI:10.12989/aas.2019.6.1.069
49. Finite elements with node dependent kinematics and scalable accuracy for the analysis of Stokes flows
  articolo
  
  Guarnera, D.; Zappino, E.; Pagani, A.; Carrera, E.
  AEROTECNICA MISSILI E SPAZIO
  Associazione Italiana di Aeronautica e Astronautica
  Vol.97 pp.11 (pp.208-218) ISSN:0365-7442
50. Drop Test Simulations of Composite Leaf Spring Landing Gears
  articolo
  
  Pagani, A.; Augello, R.; Governale, G.; Viglietti, A.
  AEROTECNICA MISSILI E SPAZIO
  Springer
  Vol.98 pp.12 (pp.63-74) ISSN:0365-7442 DOI:10.1007/s42496-018-00005-y
51. On the Effectiveness of Higher-Order One-Dimensional Models for Physically Nonlinear Problems
  capitolo
  
  Kaleel, I.; Petrolo, M.; Carrera, E.; Waas, A. M.
  Advances in Predictive Models and Methodologies for Numerically Efficient Linear and Nonlinear Analysis of Composites
  Marco Petrolo/Springer Nature Switzerland
  pp.15 (pp.67-81) ISBN:9783030119683 DOI:10.1007/978-3-030-11969-0_5
52. Advances in Predictive Models and Methodologies for Numerically Efficient Linear and Nonlinear Analysis of Composites
  curatela
  
  Petrolo, Marco
  Springer Nature Switzerland
  pp.198 ISBN:9783030119683
53. Simulation of Lamb waves via refined FE models with SHM applications
  proceeding
  
  Garcia de Miguel, Alberto; Pagani, Alfonso; Carrera, Erasmo
  In: Proceedings of the AIAA SciTech Forum and Exposition: The American Institute of Aeronautics and Astronautics (SciTech 2019)
  American Institute of Aeronautics and Astronautics, Inc. (STATI UNITI D'AMERICA)
  AIAA SciTech Forum and Exposition: The American Institute of Aeronautics and Astronautics (SciTech 2019) (San Diego, CA, USA) January 7-11, 2019
  pp.10 (pp.1-10) ISBN:9781624105784 DOI:10.2514/6.2019-1757
54. Global/local analysis of free-edge stresses in composite laminates
  proceeding
  
  Carrera, Erasmo; Garcia de Miguel, Alberto; Fiordilino, Giacinto A.; Pagani, Alfonso
  In: Proceedings of the AIAA SciTech Forum and Exposition: The American Institute of Aeronautics and Astronautics (SciTech 2019)
  American Institute of Aeronautics and Astronautics, Inc (STATI UNITI D'AMERICA)
  AIAA SciTech Forum and Exposition: The American Institute of Aeronautics and Astronautics (SciTech 2019) (San Diego, CA, USA) January 7-11, 2019
  pp.7 (pp.1-7) ISBN:9781624105784 DOI:10.2514/6.2019-1760
55. Best Theory Diagrams for Shell Finite Elements
  proceeding
  
  Petrolo, M.; Carrera, E.
  In: AIAA Scitech 2019 Forum
  AIAA
  AIAA Scitech 2019 Forum (San Diego, USA) 7-11 January 2019
  pp.16 ISBN:9781624105784 DOI:10.2514/6.2019-1765
56. An adaptable refinement approach for shell finite element models based on node-dependent kinematics
  articolo
  
  Li, G.; Carrera, E.; Cinefra, M.; de Miguel, A. G.; Pagani, A.; Zappino, E.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.210 pp.19 (pp.1-19) ISSN:0263-8223 DOI:10.1016/j.compstruct.2018.10.111
57. Finite beam elements based on Legendre polynomial expansions and node-dependent kinematics for the global-local analysis of composite structures
  articolo
  
  Li, G.; de Miguel, A. G.; Pagani, A.; Zappino, E.; Carrera, E.
  EUROPEAN JOURNAL OF MECHANICS. A, SOLIDS
  Elsevier
  Vol.74 pp.12 (pp.112-123) ISSN:0997-7538 DOI:10.1016/j.euromechsol.2018.11.006
58. Dynamic response of laminated and sandwich composite structures via 1D models based on Chebyshev polynomials
  articolo
  
  Pagani, A; Petrolo, M; Carrera, E
  JOURNAL OF SANDWICH STRUCTURES AND MATERIALS
  Jack R Vinson / Sage Publishing
  Vol.21 pp.17 (pp.1428-1444) ISSN:1099-6362 DOI:10.1177/1099636217715582
2018
1. Evaluation of geometrically nonlinear effects due to large cross-sectional deformations of compact and shell-like structures
  articolo
  
  Carrera, E.; Pagani, A.; Augello, R.
  MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
  Taylor and Francis Inc.
  Vol.27 pp.9 (pp.1269-1277) ISSN:1537-6494 DOI:10.1080/15376494.2018.1507063
2017
1. Special issue dedicated to aeroelasticity and structural dynamics
  editoriale
  
  Dimitriadis, G.; De Breuker, R.; Pagani, A.
  ADVANCES IN AIRCRAFT AND SPACECRAFT SCIENCE
  Techno Press
  Vol.4 pp.2 (pp.i-ii) ISSN:2287-528X DOI:10.12989/aas.2017.4.2.00i
2016
1. Thermal Stress Analysis of Composite Beams, Plates and Shells
  monografia
  
  Carrera, Erasmo; Fazzolari, Fiorenzo; Cinefra, Maria
  ELSEVIER
  pp.470 ISBN:9780128498927
2014
1. Temperature Profiles in Composite and Sandwich Shells
  capitolo
  
  Carrera, Erasmo; Brischetto, Salvatore
  Encyclopedia of Thermal Stresses
  Richard B. Hetnarski
  Vol.1 pp.9 (pp.4797-4805) DOI:10.1007/978-94-007-2739-7
2. FINITE ELEMENT ANALYSIS OF STRUCTURES THROUGH UNIFIED FORMULATION
  monografia
  
  Carrera, Erasmo; Cinefra, Maria; Petrolo, Marco; Zappino, Enrico
  John Wiley & Sons Ltd (STATI UNITI D'AMERICA)
  pp.410 ISBN:9781119941217
2013
1. Classical, refined and component-wise analysis of reinforced-shell structures
  articolo
  
  Carrera, Erasmo; Pagani, Alfonso; Petrolo, Marco
  AIAA JOURNAL
  AMER INST AERONAUTICS ASTRONAUTICS
  Vol.51 pp.14 (pp.1255-1268) ISSN:0001-1452 DOI:10.2514/1.J052331
2011
1. Plates and Shells for Smart Structures: Classical and Advanced Theories for Modeling and Analysis
  monografia
  
  Carrera, Erasmo; Brischetto, Salvatore; Nali, Pietro
  John Wiley & Sons Ltd
  pp.309 (pp.1-309) ISBN:9780470971208
2010
1. Variable kinematics and advanced variational statements for free vibrations analysis of piezoelectric plates and shells
  articolo
  
  Carrera, Erasmo; Brischetto, Salvatore; Cinefra, Maria
  COMPUTER MODELING IN ENGINEERING & SCIENCES
  Tech Science Press
  Vol.65 pp.83 (pp.259-341) ISSN:1526-1492 DOI:10.3970/cmes.2010.065.259